3500 tables wanted

[3400-95-Modified]

If anyone has any fuel or spark tables from a 3500 Bin file they would be much appreciated... Either a CSV or an excel table would be great.

I'm looking for MAF, VE, GFS, BFS, MBTS and so on... Anything to help a stock 3500 run on a 3400 ECM.

I have a few of those but not all of them.

[sprucegagt]

One would think that the 3400 tables wouldn't be all that different from the 3500 tables. At least to get the engine running.

[3400-95-Modified]

This is not just "to get the engine running" They differ a good amount because the flow numbers on a 3500 head vs a 3400 head stock are quite different.

I'm looking to get these files so I can flash and ECM to run a stock 3500 that the user does not intend to further tune the ECM... He simply wants the stock 3500 values in place.

Also the combustion chamber of the 3500 heads and the CR are different so the spark tabels also differ a good amount.

I have a 3500 VE and 3500 spark table, I would just like to get a 3500 MAF 3500 BFS and MBTS table...

[IsaacHayes]

I was going to say I think I had the spark somewhere. But looks like you got that. Have you spoke with Ben?

[Superdave]

When i did my OBD1 chip for a stock 3500 swap i started off with a 3400 tune, idle VE and part throttle ended up being nearly identical. WOT was a different story though.


I'd be interested in the spark tables as well, most of my table is stock 3.1 values.. (aside from WOT).

[IsaacHayes]

Not sure how much help it would be for a SD system Dave. It's listed as advance vs grams/sec of air (MAF)...

[3400-95-Modified]

Spark Tables are listed as Mg/Cylinder vs RPM.... NOT by MAF values.

Dave I have the Good Fuel spark table if you want it, I just wanted to get all of them... but I may have to work with what I have.

[IsaacHayes]

Ah, well still doesn't that make it hard to translate that data into SD tables?

[onefastV6]

check your post on the PT site, you should be pleased

[robertisaar]

Ah, well still doesn't that make it hard to translate that data into SD tables?

not really, might need to fill in a few spots but generally, MAP or MAF, spark tables are pretty similar.

i'm using the spark table from a $1FA as a base tune for my $DF 3100 tuning... MAF->SD

[Realestdriver]

I have a 99' Grand Am GT with a full 3500 swap with 3400 UIM and was looking for anyone that could do a good tune for a 3500, because I don't think I'm getting at its full potential. It was tuned once by MPR but it might have been their first. Any suggestions?

*Don't plan to buy a tuner, because it is my daily driver and I just want it to have a strong powerband.

[3400-95-Modified]

check your post on the PT site, you should be pleased

NICE! Thanks.