Announcement

Collapse
No announcement yet.

Computer for '97 N body. 3100 replaced with 3400

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Computer for '97 N body. 3100 replaced with 3400

    Trying to figure out what computer to use in a '97 Skylark. the car used to have a 3100 and now has a 3400. It ran pretty decent with the 3100 and 3100 injectors but we are thinknig of replacing the injectors with ones from the 3400 and we want to get a compatible computer. We were thinkgi about going with a '96 minivan computer. Any suggestions?
    Lorenzo
    '11 DODGE Challenger R/ T Classic 57M6 Green with Envy "Giant Green Squid"
    '92 PONTIAC Grand Prix SE 34TDCM5 "Red Lobster"

  • #2
    What trans/final drive does it have? That might limit you on stock programmed computers. I would stick with 97+ if possible. Any plans to tune it instead? Might be easier to have the stock ECM programmed for the engine.
    Ben
    60DegreeV6.com
    WOT-Tech.com

    Comment


    • #3
      What year 3400 injectors are you using?

      I can tell you that finding a compatible PCM may be a challenge because even though similar equipment is used between GM makes, the PCM code is usually different. You could have the current PCM tuned. DHP should be able to do that for you.
      Your local OBDII moderator

      2000 Grand Am GT w/ WOT parts

      Comment


      • #4
        I have a 98 Chevy Malibu that came with a 3100. I swapped in a 3400, and used trailblazer injectors. DHP did a crap job on the PCM, and had horrible customer service.

        I have MP racing working on a custom tune for me right now. Might want to look him up.

        Comment


        • #5
          If you buy a DHP powertunr you can edit your stock ECM for the larger injectors, and setup the spark table values that a 3400 uses/etc.
          sigpic New 2010 project (click image)
          1994 3100 BERETTA. 200,000+ miles
          16.0 1/4 mile when stock. Now ???
          Original L82 Longblock
          with LA1, LX9, LX5 parts
          Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.

          Comment

          Working...
          X