OBDII conversion in progress.

[Rhedalert]

Valve timing- Int -7 BTDC, 37 ABDC; Exh 41BBDC, -3 ATDC
Lobe lift: Int: .288 , exh: .288
LSA: 112
Dur@.050: Int: 210, Exh: 218
Adv Dur: Int: 265, Exh: 273

I'm still waiting on my powertuner. They're a little slow, but Im in a hurry to get this engine under control, at idle at least.

[3400-95-Modified]

So your saying I should order mine now if I want to see it in like 2 months... haha.

Do you have a pinout chart for the 97 cutlass ecm so I can compare it to a 96 beretta. just the body style alone may have different pinouts. My ecm is at home so I dont know the number on it right now.

And that cam has slightly longer duration compared to a stage 1 but less lift... I wonder how my stage 1 cam will run on a stock tune...

[Darin]

Here is the pinouts for a 97 cutlass, It will probably load slow.

http://www.24-7-swapmeet.com/97-olds-cutlass.htm

Any particular GM vehicles you would like, I will add them on request.

[Rhedalert]

if it's anything like my car's running, it won't start easy when cold, and it'll idle like hell (major lope) of course believe it or not, my OBD1 3100 PCM handled this engine better at idle than the OBD2 3400 PCM. So it really depends.

Yes, I'd order the DHP now if I were you.

I think if the PCM is the same, then the pinouts *should* be the same too. So far I have run w-body, H-body and minivan PCM's (of '96-97) on the same harness with nothing to modify.

I just did a quick search on car-part.com for a '96 Beretta PCM, and everything GM's are coming up, so they are interchangeable.

[3400-95-Modified]

I may go to the yard this weekend I'll see what I can come up with.

[blackbombshell95]

I hear the 98 to 99 monte/lumina computer/wiring harnesses is the best way to go. Infact I'm having Brian Teel wire my 95 Grand Prix 3100 4t60e harness to a 98/99 monte/lumina harness.

It can be done and he has done it. Check out www.motorswap.org. He charges $300 to wire the 2 harnesses to together. He is also rewiring my injectors for l67 injectors.

[Rhedalert]

what two harnesses? You mean interior harness to exterior harness?

[gboogie99]

darin, got something for a 95 cutlass ciera?

[blackbombshell95]

Computer harnesses

[gboogie99]

you mean to hook up a newer computer to the old harness or what?

[Darin]

darin, got something for a 95 cutlass ciera?

What are you specifically looking for? I think all I currently have is 3800 stuff, I'll have to look, Corey (blackBombShell) bought the last of my 3100 obdII stuff.

[gboogie99]

well if there is some kind of adapter to use a 95 obd 1.5 harness on a 96 computer, thats what I would like to get.

[Azrael]

A wiring harness adapter would be cool but you'd still have to add some new wiring for things like the MAF sensor, which were't used with OBD 1.5.

I'm trying to put together a sort of check list of things needed for such a swap. Might make a for a good article on this site. But I'll leave a proper DIY guide to someone more experienced in the matter.

[Rhedalert]

I've been meaning to do that too.

[3400-95-Modified]

Well It's all done and it runs, And I didn't even remove my dash harness...

I still have a OBDI.5 com port on the drivers side...

Well this is how she sits right now.

I'll be driving it to work tomorrow so I'll let you know how that goes.









Extra Parts... Fuel gauge went bad and leaked the liquid out of it so I guess I'm gonna scrap it. I'll just stick to a tester to set my pressure, I could never see this gauge anyways. NOS stuff will also get cleaned up and then put back in.




Function over Form right now... I'll clean up the wiring mess now that I know it runs.




Power tuner FTW!!!


Proof it runs...
Running Vid... 4mb video