Cold tuning $A1

[alainman15]

i'm unable to download the A1.xdf ans A1.adx files from the tunerpro site for some reason whenever i try to download i get a page with a bunch of gibberish.

[robertisaar]

i actually contacted mark about that a little while ago, it has to do with the file's structure, apparently the server doesn't like it and tries to deliver it as HTM.

for the tech savvy, you could just copy it all into notepad and save it as XDF and ADX.

if not, e-mail/PM me and i'll get them to you.

[alainman15]

woah is it just me or is there alot more stuff you can play around with?

and will a tunerpro v4 bin work? it should right?

[robertisaar]

woah is it just me or is there alot more stuff you can play around with?

and will a tunerpro v4 bin work? it should right?

it's not just you! i added a LOT of stuff. a V4 BIN will work fine, but the XDF is V5 only.

and i don't know why i didn't think of it earlier, but i'll just stick the ADX and XDF here...

[alainman15]

for some odd reason i cant connect to my ecm with tunerpro V5. i'm using the aldlcable from aldcable.com. whenever i try to connect it just says "connecting..." and nothing happens.
I can connect with V4 fine, but for some reason not tunerpro V5. is there anything that needs to be done?

[robertisaar]

check your port settings?

[alainman15]

Ya I was looking for that but i cant find it. it doesn'e seem to be under preferences like v4

[robertisaar]

it is, just harder to find.

get into preferences, go to the "Data Acq./Emulation" tab, select "use Plug-In" in interface type, click "configure plug-in component" and then you'll see it.