Announcement

Collapse
No announcement yet.

how would you say this is running?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • how would you say this is running?






    stock tune, stock 2.8 injectors

    according to wideband its running good, but that doest say everything
    sigpic
    88 Beretta CL- 13.641@102.76mph (rwd LS1/t56 conversion in progress)

    77 Celica GT- 3400/3500 swap in progress (engine from the beretta)

  • #2
    I dont see anything.. ???
    Lifting my front wheels, one jack at a time.

    Comment


    • #3
      there is some screen shots attached of tunerpro. i can see them... weird
      sigpic
      88 Beretta CL- 13.641@102.76mph (rwd LS1/t56 conversion in progress)

      77 Celica GT- 3400/3500 swap in progress (engine from the beretta)

      Comment


      • #4
        That info doesnt tell us anything. you need to data log driving it and post up the .csv export.
        sigpic New 2010 project (click image)
        1994 3100 BERETTA. 200,000+ miles
        16.0 1/4 mile when stock. Now ???
        Original L82 Longblock
        with LA1, LX9, LX5 parts
        Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.

        Comment


        • #5
          o lol. i will go do that in a bit
          sigpic
          88 Beretta CL- 13.641@102.76mph (rwd LS1/t56 conversion in progress)

          77 Celica GT- 3400/3500 swap in progress (engine from the beretta)

          Comment


          • #6
            well i just treid doing that.... it said there was an error and couldnt do it or something like that.. tried looking for a way to change the file path but i didnt see a way... just when i thought i had it...
            sigpic
            88 Beretta CL- 13.641@102.76mph (rwd LS1/t56 conversion in progress)

            77 Celica GT- 3400/3500 swap in progress (engine from the beretta)

            Comment


            • #7
              hit f4 and then click choose log file type in a name and click open and it wil lcreate one.
              sigpic New 2010 project (click image)
              1994 3100 BERETTA. 200,000+ miles
              16.0 1/4 mile when stock. Now ???
              Original L82 Longblock
              with LA1, LX9, LX5 parts
              Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.

              Comment


              • #8


                sigpic
                88 Beretta CL- 13.641@102.76mph (rwd LS1/t56 conversion in progress)

                77 Celica GT- 3400/3500 swap in progress (engine from the beretta)

                Comment


                • #9
                  hmmm, Uhm, you typed a file name and clicked open for select file to rec/play? Hmm wish I could remote in and see whats the deal LOL
                  sigpic New 2010 project (click image)
                  1994 3100 BERETTA. 200,000+ miles
                  16.0 1/4 mile when stock. Now ???
                  Original L82 Longblock
                  with LA1, LX9, LX5 parts
                  Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.

                  Comment


                  • #10
                    there are no recorded sessions in that log...



                    1. Hit the button for "select log file for record/play"
                    2. Navigate to your dedktop, in the file name place type in: Datalog
                    3. Hit Open it will say "Log file does not exist, create it?" hit Yes
                    4. Connect the ALDL to the car and make sure you are recieving data
                    5. Hit the red Record button and go for a drive, a hilly area is best and mabe a few WOT runs through 1st or 2nd gear
                    6. Hit stop, in the box that comes up just type in some random info.
                    7. Open back up the "ALDL Setup", you'll see now that there are sessions in the log.
                    8. Hit the button that says "export selected session to CSV"
                    9. Make up a file name like "Test" and hit save.
                    10. Upload the .csv to this thread
                    Past Builds;
                    1991 Z24, 3500/5 Spd. 275WHP/259WTQ 13.07@108 MPH
                    1989 Camaro RS, ITB-3500/700R4. 263WHP/263WTQ 13.52@99.2 MPH
                    Current Project;
                    1972 Nova 12.73@105.7 MPH

                    Comment


                    • #11
                      alright i got it

                      it didnt like to run the log for the whole time so im not sure exactly what it got loged. i would like to get a log of it dying at idle. randomly dies like i turn it off, idle is uped using the bent braket method so it will at least idle. im assuming thats the reason it wont go past 99.6 on the tps..

                      got a few WOT if it recorded them and a lot of hills. i was mostly in 5th
                      Attached Files
                      Last edited by Alxsmt; 07-20-2008, 09:23 PM.
                      sigpic
                      88 Beretta CL- 13.641@102.76mph (rwd LS1/t56 conversion in progress)

                      77 Celica GT- 3400/3500 swap in progress (engine from the beretta)

                      Comment


                      • #12
                        question. how do i open a .csv file? lol sorry im retarded i know

                        for as much as i know about computers i think i should be able to figure this out lol
                        sigpic
                        88 Beretta CL- 13.641@102.76mph (rwd LS1/t56 conversion in progress)

                        77 Celica GT- 3400/3500 swap in progress (engine from the beretta)

                        Comment


                        • #13
                          both those files are empty


                          .csv will open in Microsoft Excel
                          Past Builds;
                          1991 Z24, 3500/5 Spd. 275WHP/259WTQ 13.07@108 MPH
                          1989 Camaro RS, ITB-3500/700R4. 263WHP/263WTQ 13.52@99.2 MPH
                          Current Project;
                          1972 Nova 12.73@105.7 MPH

                          Comment


                          • #14
                            ahh! this isnt cool.. i dont have excel.. maybe i will in a min. i will go attempt the log again lol
                            sigpic
                            88 Beretta CL- 13.641@102.76mph (rwd LS1/t56 conversion in progress)

                            77 Celica GT- 3400/3500 swap in progress (engine from the beretta)

                            Comment


                            • #15
                              If you don't have access to Excel, you can always download OpenOffice from Sun and use the spreadsheet program it has.

                              Join the OpenOffice revolution, the free office productivity suite with over 375 million trusted downloads.
                              -Brad-
                              89 Mustang : Future 60V6 Power
                              sigpic
                              Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

                              Comment

                              Working...
                              X