Tweet
Ok I have some things I need to sell/dispose off.
Heads:
Bought for a 3100 SFI. I bought these from a yard, there description says they are from a 2000 Malibu with 40K on it. While installed on my motor they seen MAYBE 75 miles. They are ugly and dirty, in other words used and needs a cleaning.
Im not sure what something like this normally goes for, so I will throw $200 out there and see what happens?
*** Will include the stock rockers for these also as I have no need for them!***
I have some gaskets! The valve cover gaskets and notorious Intake Gaskets. I bought these new and just like the heads seen 75 miles or less. Most of the driving done on the 75 or less was a 4 mile drive to my GF's work...
Anyhow the Intake Gaskets were bought for $54 and the Valves I believe were $13. Im gonna ask for $40 shipped. Yes these are good and easily usable!
Fuel Rail:
Off a 3100 SFI. I have the injectors also not pictured. I replaced the O Rings on the rail/injectors which cost $12.
With Injectors $60, without $10
Plenum/Throttle Body:
I cleaned the TB very well, all passages are free/clean. I tossed the Plenum in a parts wash tank at work for about 6 hours. There is a new TB gasket in between the two. Painted 1200 degree black. SOme coolant blew by on it, should clean off...
$50
Misc Stuff?
Take a look at the pic. If your interested name a price and its probably yours if its worth messing with?
Shipping not included unless noted and when noted is within the 48 states.
Heads:
Bought for a 3100 SFI. I bought these from a yard, there description says they are from a 2000 Malibu with 40K on it. While installed on my motor they seen MAYBE 75 miles. They are ugly and dirty, in other words used and needs a cleaning.
Im not sure what something like this normally goes for, so I will throw $200 out there and see what happens?
*** Will include the stock rockers for these also as I have no need for them!***
I have some gaskets! The valve cover gaskets and notorious Intake Gaskets. I bought these new and just like the heads seen 75 miles or less. Most of the driving done on the 75 or less was a 4 mile drive to my GF's work...
Anyhow the Intake Gaskets were bought for $54 and the Valves I believe were $13. Im gonna ask for $40 shipped. Yes these are good and easily usable!
Fuel Rail:
Off a 3100 SFI. I have the injectors also not pictured. I replaced the O Rings on the rail/injectors which cost $12.
With Injectors $60, without $10
Plenum/Throttle Body:
I cleaned the TB very well, all passages are free/clean. I tossed the Plenum in a parts wash tank at work for about 6 hours. There is a new TB gasket in between the two. Painted 1200 degree black. SOme coolant blew by on it, should clean off...
$50
Misc Stuff?
Take a look at the pic. If your interested name a price and its probably yours if its worth messing with?
Shipping not included unless noted and when noted is within the 48 states.
Comment