Tweet
Heres a list of stuff. Here goes
- Gen II 3.1 mpfi stock throttle bodies. They will not include the TPS, but other then that, they are complete. I have 2 of them. $30 each obo.
- Gen II 3.1 mpfi stock exhaust manifolds. It comes with the crossover pipe. I may or may not have the heat sheilds ( I didn't see them when I was looking, but could look again). $35 obo for all 3.
- Gen II 3.1 mpfi stock upper intake manifold. $25
- Gen II 3.1 mpfi stock lower intake manifold. $30
- Gen II 3.1 mpfi stock valve covers $25[/url]
- Gen II 3.1 mpfi stock fuel rail. This came out of an engine I never ran (as it was seized). I can only assume it works. I would give the user a couple of weeks to test it, and if it doesn't work, refund his/her money. $25
- Gen III 3.1 mpfi stock upper intake manifold. It's the small port one. I started polishing it, but then I switched to a different intake, and never finished polishing it. Pics tells the story. $40 obo
- Gen II 3.1 mpfi stock heads. They are fairly complete, missing some retainers for two of the valves. They need to be cleaned, as they are really grimey. $60 obo for the pair. I will be removing the rear exhaust manifold (in the picture) and selling that as well.
- Gen II 3.1 Port and Polished Heads. I bought these years ago off of a fellow member. I picked them up in the winter and let them sit as I was planning on swapping them on in the summer. I then ended up going with gen III, and they sat longer. When I bought them, the seller said he had a valve break on him, but the heads were fine. Unfortunatley he was wrong, and I didn't see it until it sat for a year. I don't know if it's a serious problem or not (I hope not, because the pnp job is really well done). I took big pics, so hopefully you can see what I'm talking about. Reasonable offers Pls.
you can see the mess up in the following pic
- Gen II 3.1 mpfi stock timing chain cover. $25
- Gen II 3.1 mpfi stock cam. I don't know much about it, it looks ok to me, but I don't claim to be an expert by any means. Best Offer.
- Small intercooler off of a renault something or rather. It's measurements are 7.25in wide by 8.25in tall by 3.5in thick. Both inlets are on one side. End caps are plastic. Overall length is about 13in.
- Stock Gen II 3.1 mpfi engine. It's pretty much complete minus some sensors and accessories. I might also steal the oil pan. It may need some new upper intake manifolds as I don't know where they went. The engine was taken out probably two years ago, and it was still running strong when pulled. It would suggest a rebuilt though as it's been sitting, and it has high miles (should be in the area of 400 000 km) yah, i know thats a lot.
Maybe it would be better as parts. $125 obo
- New Infinity 1230 sub + Box. I have a new, never used Infinity 1230 sub and sealed box. It was purchased at futureshop as an x-mas gift, I opened up the box to take a look, with intention on using it, but my new (used) car comes with different speakers that I would rather use. Since it's opened, I can't return it, and besides I don't have the receipt as it was a gift.
Futureshop is asking 150$ + tax for the sub, and 230$ + tax for the sub and box.
sub:
sub and box combo:
I'm asking 175$ firm. Your saving almost 100$ for the same thing (230$ + taxes = 264$)
Remember, it's new, never used.
I think that's all of it for now. All prices are in CDN funds. I would prefer local pick up (I live in burlington ontario, so I'm within 45 mins of Niagara/Hamilton/Guelph/Brantford/Kitchener/Toronto. I am willing to ship at buyers expense. I don't think I'll ship the engine though, as that's just a pain in the ass.
anyways pm me with any thing or message here.
feavs
- Gen II 3.1 mpfi stock throttle bodies. They will not include the TPS, but other then that, they are complete. I have 2 of them. $30 each obo.
- Gen II 3.1 mpfi stock exhaust manifolds. It comes with the crossover pipe. I may or may not have the heat sheilds ( I didn't see them when I was looking, but could look again). $35 obo for all 3.
- Gen II 3.1 mpfi stock upper intake manifold. $25
- Gen II 3.1 mpfi stock lower intake manifold. $30
- Gen II 3.1 mpfi stock valve covers $25[/url]
- Gen II 3.1 mpfi stock fuel rail. This came out of an engine I never ran (as it was seized). I can only assume it works. I would give the user a couple of weeks to test it, and if it doesn't work, refund his/her money. $25
- Gen III 3.1 mpfi stock upper intake manifold. It's the small port one. I started polishing it, but then I switched to a different intake, and never finished polishing it. Pics tells the story. $40 obo
- Gen II 3.1 mpfi stock heads. They are fairly complete, missing some retainers for two of the valves. They need to be cleaned, as they are really grimey. $60 obo for the pair. I will be removing the rear exhaust manifold (in the picture) and selling that as well.
- Gen II 3.1 Port and Polished Heads. I bought these years ago off of a fellow member. I picked them up in the winter and let them sit as I was planning on swapping them on in the summer. I then ended up going with gen III, and they sat longer. When I bought them, the seller said he had a valve break on him, but the heads were fine. Unfortunatley he was wrong, and I didn't see it until it sat for a year. I don't know if it's a serious problem or not (I hope not, because the pnp job is really well done). I took big pics, so hopefully you can see what I'm talking about. Reasonable offers Pls.
you can see the mess up in the following pic
- Gen II 3.1 mpfi stock timing chain cover. $25
- Gen II 3.1 mpfi stock cam. I don't know much about it, it looks ok to me, but I don't claim to be an expert by any means. Best Offer.
- Small intercooler off of a renault something or rather. It's measurements are 7.25in wide by 8.25in tall by 3.5in thick. Both inlets are on one side. End caps are plastic. Overall length is about 13in.
- Stock Gen II 3.1 mpfi engine. It's pretty much complete minus some sensors and accessories. I might also steal the oil pan. It may need some new upper intake manifolds as I don't know where they went. The engine was taken out probably two years ago, and it was still running strong when pulled. It would suggest a rebuilt though as it's been sitting, and it has high miles (should be in the area of 400 000 km) yah, i know thats a lot.
Maybe it would be better as parts. $125 obo
- New Infinity 1230 sub + Box. I have a new, never used Infinity 1230 sub and sealed box. It was purchased at futureshop as an x-mas gift, I opened up the box to take a look, with intention on using it, but my new (used) car comes with different speakers that I would rather use. Since it's opened, I can't return it, and besides I don't have the receipt as it was a gift.
Futureshop is asking 150$ + tax for the sub, and 230$ + tax for the sub and box.
sub:
sub and box combo:
I'm asking 175$ firm. Your saving almost 100$ for the same thing (230$ + taxes = 264$)
Remember, it's new, never used.
I think that's all of it for now. All prices are in CDN funds. I would prefer local pick up (I live in burlington ontario, so I'm within 45 mins of Niagara/Hamilton/Guelph/Brantford/Kitchener/Toronto. I am willing to ship at buyers expense. I don't think I'll ship the engine though, as that's just a pain in the ass.
anyways pm me with any thing or message here.
feavs
