*turbo* and stuff for sale/free

[dohcfiend]

here is the updated list with a few price changes after what was either sold, trashed or put on ebay:

91+ grand prix bra $20
1 set of 94-95 cams $100 good for grinding or replacement *if u buy the cams i will include the housings if u want them for free.
1 set of empty 94-95 cam carriers $15 *************
1 performance dynomax muffler $15 ************
1 4t60e tranny good for core $25
FREE:
1 4t60e tq converter showing symptons **************
1 set of like new stock plug wires $10 **************
new throwout bearing for 284 $20 shipped
91-93 harness looks complete and seems to be setup/modified for 5 spd $25
used stock fuel pump worked when pulled for a high volume unit appears to be complete $5 *******************
1 set of accel 7mm sparkplug wires look to be in good condition, $20
1 rear valvecover for a 91-95 FREE ********************
1 set of power and ground wires FREE ***************
lq1 tranny cooler $20
lq1 oil cooler setup 90% complete $30
93 lq1 rad $20
egr adapter kit: what it does is if you get a 96-97 crate motor and you have a 91-95 intake, it will allow you to connect your egr up with no hassle uses stock gaskets. $25
96-97 coilpack bracket $10

everything with astericks beside them will be trashed by next monday. so if you are thinking about it, decide quickly.

[5speedz34]

Ok so this is just the big long one, not the engine support bracket?

[dohcfiend]

uh yeah i guess. it is the bracket that you mount your coilpacks on if you had a 96-97 or wanted to relocate your coilpacks to that spot if you have done an intake swap or whatever. i think you are referring to one of the mounts you actually pull then out with. then the answer would be no, it is not that.

[5speedz34]

Can you post a pic?

[gboogie99]

can you also post apic of the gn turbo?

[dohcfiend]

5speedz34,
looks like i messed up with that line in the post. "i think you are referring to one of the mounts you actually pull then out with. then the answer would be no, it is not that."

WHAT I MEANT TO SAY WAS: I THINK YOU ARE REFERRING TO ONE OF THE MOUNTS YOU ACTUALLY PULL THE ENGINE OUT WITH. -look, i am not jumping through all these hoops for a $10 part. i suggest you ask some1 with a 96-97 motor or some1 doing an intake swap for a pic or do some research of your own. there are several articles concerning a 96-97 intake swap or motor swap, look through them and you may find a pic.

gboogie99,
it is on a scheduled listing for ebay hitting tonight, as soon as it hits i will put up a link.

also if no1 buys that bra by monday, it will end up going on my gp.

[5speedz34]

5speedz34,
looks like i messed up with that line in the post. "i think you are referring to one of the mounts you actually pull then out with. then the answer would be no, it is not that."

WHAT I MEANT TO SAY WAS: I THINK YOU ARE REFERRING TO ONE OF THE MOUNTS YOU ACTUALLY PULL THE ENGINE OUT WITH. -look, i am not jumping through all these hoops for a $10 part. i suggest you ask some1 with a 96-97 motor or some1 doing an intake swap for a pic or do some research of your own. there are several articles concerning a 96-97 intake swap or motor swap, look through them and you may find a pic.

gboogie99,
it is on a scheduled listing for ebay hitting tonight, as soon as it hits i will put up a link.

also if no1 buys that bra by monday, it will end up going on my gp.

Well, if you could make sense in your post then I would know wtf your talking about. I just got done pulling a whole top end of a 96 and I need to know what you have.

But yeah I'll take it. Do you have the bolt that holds it into the timing cover?

[dohcfiend]

actually it is a little stud with a nut, like a miniture version of the setup that holds the exhaust manifolds on. a stock timing cover bolt will do just a tad bit harder t install but not impossible by any means.

pm me your addy and i will get you a quote.

new list, stuff trashed and prices changed:
1 set of 94-95 cams $75 good for grinding or replacement **********
1 performance dynomax muffler $15 ************
91-93 harness looks complete and seems to be setup/modified for 5 spd $25 *************
1 set of accel 7mm sparkplug wires look to be in good condition, $15 *****
lq1 tranny cooler $20 *****************
lq1 oil cooler setup 90% complete $30
93 lq1 rad $15
96-97 coilpack bracket $10

everything with astericks beside them will be trashed by the following monday after the 5th. so if you are thinking about it, decide quickly.

[RebelGT]

whats the dimenions on the radiator?

[SappySE107]

Is there any rust on the cams? Can you take pictures? Id hate to see you throw those away.

[dohcfiend]

the rad? it is a 91-93 rad out of a lumina z34(mine not part of the surplus from the gtp purchase) if you have a 91-93 wbody it should fit right in. 94 wbody rads are a little larger. do you want the carriers at all? right now the cams are out of the carriers. i still have the carriers sitting outside waiting to be trashed monday, if you get the cams they will be free if you want them.

[SappySE107]

I really just want the front intake cam. I have a set of cams here and I doubt anyone is going to pay you 75 for them plus shipping (which is about 50 bucks for 4 cams).

[dohcfiend]

granted. i will lower the price to 50 bux for all 4 of them but that is the bottom line. that is only 12.50 per cam. i will have pics of them tomorrow. however, i am not willing to split them up.

[SappySE107]

Im not paying 100 shipped for them either so good luck. Not willing to split them up so you are gonna throw them away...thanks.

[dohcfiend]

shipping should be 35 bux for priority mail. probably 26 something for parcel post. or if that is your concern, i can send it media mail for cheap. but the post office doesn't have the ability to track that.

well, you can always pay 50 bux for one of them and shipping would be reasonable. the other 3 would then be free to whomever wanted them. either way anything less than 50 bux for them is a waste of my time.