gen 3 Fuel pressure regulator caps, 20 plus shipping

[SappySE107]

I paid 20 a pop for these and just want them gone. They were done by Kimmo, who made the billet TBs for FDP back in the day and also made these caps. Ill get a picture after this weekend, but I will say they are scratched up looking as they have been well traveled between warsaw and mishawaka.

You have to cut the top of your FPR off, put a penny on the spring, and install this cap. Then you can raise your fuel pressure. Could be useful for those that can tune their cars...otherwise you really don't want this. I won't be getting any more of these, and I have 5 of them now. Shipping should be about 5 bucks with the packaging/box to most of the US, probably close to the same for canada.

[Mars]

Does it work on the 3X00's?

When you say cut the top off the FPR, do you just use a dremel and slice it right in half? or...?

I will more than likely get one from you.

[bszopi]

I have a pic of one around here somewhere... just have to find it!

[bszopi]

Well, here is a pic of Chris's on his engine... not the best, but gives an idea.

[blackbombshell95]

pardon me if I go off track, the upper intake and valve covers powder coated?

[bszopi]

Yes.

[GinoBeats]

Put me down for one, let me know the details later