Announcement

Collapse
No announcement yet.

Wanted: '96+ 3.4 injectors-- (DOHC)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wanted: '96+ 3.4 injectors-- (DOHC)

    Anyone have a set of '96+ 3.4 injectors (24lb/hr) they are willing to part with?

    I want to change my injectors and I was told that any year 96 and newer 3.4 injectors fixed the issues with the 91-93 injectors, plus they run quiet.

    You\'ll only see tail lights getting small...

  • #2
    I've got 3400 injectors froma 2000 Grand Am GT.

    They're a tad dirty, but still work great. I definatly don't need them. I have the plugs too.
    1995 Grand Am GT
    3400 V6 / 4T60-E / Engine Swap
    3400 Engine Swap Guide Version 2.5 is Available!
    www.3400swap.com

    Comment


    • #3
      Cool! I want them... I need the plugs too - I've got the older style harness plugs... and no sweat I'll clean them up. How much? and do you use paypal?
      You\'ll only see tail lights getting small...

      Comment


      • #4
        i don't think 3400 injectors are the same size as 3.4 dohc injectors.
        The Official Rotating Mass Nazi

        Comment


        • #5
          Hmm. Do you need the DOHC injectors of just the regular 3400's?
          1995 Grand Am GT
          3400 V6 / 4T60-E / Engine Swap
          3400 Engine Swap Guide Version 2.5 is Available!
          www.3400swap.com

          Comment


          • #6
            i was assuming the dohc since he listed 24lbs, i think 3400 are either 17 or 19 lbs
            The Official Rotating Mass Nazi

            Comment


            • #7
              I also gathered he requested the DOHC ones, since he also mention the 91-93 being a tad noisy ..
              New member of 200,000 mile club as of May 16, 2005

              Comment


              • #8
                Sorry.. I should have been more clear - it is for a DOHC.

                But on 3400swap the 3400 injectors are listed as 22.5lb/hr and that they would not work well with a 3.1 due to the 3.1 ECM not being programmed for the higher fuel output. I figured since I have the 3.4 ECM programmed for the higher output, that they would work? Please correct me if I'm wrong, I've done a lot of DOHC work but never an injector swap.
                You\'ll only see tail lights getting small...

                Comment


                • #9
                  Well I don't deal with dohc's so I have no clue, but if you want to buy them, I got them.
                  1995 Grand Am GT
                  3400 V6 / 4T60-E / Engine Swap
                  3400 Engine Swap Guide Version 2.5 is Available!
                  www.3400swap.com

                  Comment


                  • #10
                    Ok, I'll take them - I've been doing some homework - the '00+ plus injectors will work just fine - I did some serious seaching and found the formula for injector fuel flow rates.
                    You\'ll only see tail lights getting small...

                    Comment


                    • #11
                      What is a fair price to you? They've got about 22K miles on them, they worked in my car when I had them installed.
                      1995 Grand Am GT
                      3400 V6 / 4T60-E / Engine Swap
                      3400 Engine Swap Guide Version 2.5 is Available!
                      www.3400swap.com

                      Comment


                      • #12
                        oh, make me do the hard work will ya?

                        J/k

                        I dunno, $60.00+ S/H?

                        I'll negotiate...
                        You\'ll only see tail lights getting small...

                        Comment


                        • #13
                          That sounds good enough for me.

                          Send me your shipping info to:
                          korbendallas68@yahoo.com
                          1995 Grand Am GT
                          3400 V6 / 4T60-E / Engine Swap
                          3400 Engine Swap Guide Version 2.5 is Available!
                          www.3400swap.com

                          Comment


                          • #14
                            Done.
                            You\'ll only see tail lights getting small...

                            Comment

                            Working...
                            X