FS: 3.4 motors and parts

[fathead45]

1. 95 3.4 DOHC w/ tranny. Has around 120k on motor and trans. Ran just fine when pulled. Only thing it needs is the o-ring replaced. Has wiring harness and airbox. Looking for 450 picked up - as of right now, everything is sold on this!!

2. 92 3.4 DOHC with 200k on motor and trans. Worked when pulled out of my car, but it was running on 4 cycl. when pulled. Might need new coil, but didnt try to fix. Pulled when i did my swap. Has a new timing belt, tensioner, actuator, and the 2 plastic timing belt pullies. All timing belt stuff has about 5-10k on them. Looking for 300 picked up. - 250 - lower price

3. Gasket head set for a 91-95 3.4. Has all the gaskets minus the lower intake gaskets and 1 other small gasket. will find out tom. normally goes for about 120. Looking for 60 shipped. 50 shipped - lower price
Gaskets in kit:
*2 head gaskets
*2 cam carrier metal gaskets
*valve seals
*EGR gasket
*Metal Exhaust manifold gaskets
*waterpump gasket
*Spark plug rubber o-rings
*upper intake gasket
*No lower intake gaskets
*Dist. oring
A few more things

4. FFP poly dog bone for a 3.4. Still looks new. Looking for 50 shipped - SOLD

5. 60degreev6 3.4 Performance Chip. Will work for a 91-93 3.4 DOHC. The older eprom chip. Has egr delete, 7150 shift points, raised shift times. Looking for 80 shipped. - 70 shipped lower price

6. 92 3.4 ECM. Almost brand new. Bought about 1 year before motor swap. Paid around 120 new. Looking for 60 shipped. - 50 shipped - lower price

7. EGR block off plate for a 3.4. Its about 1/4 steel. Fits perfectly over the egr. Looking for 25 shipped. - 20 shipped - lower price

8. 180 tstat for a 3.4 looking for 10 shipped - 1 left - All sold

9. K+N drop in w/ cut and gut airbox for 91-93 3.4. Looking for 35 shipped. - 30 shipped lower price

ADDED: 1/15/07

10. 91-93 GTP hood louvers. Has everything. Ok condition. Some of the screw in pieces have to be glued back to the louver. Looking for 40 shipped

Added 1/18/07

11. Brand new AC-Delco stock 3.4 spark plugs, there the older #8 rapidfire(AC Delco #8 R42LTSM) - 10 shipped - sold

Added 2/5/07

12. 2 sets of stock spark plugs, they are the dbl silicone from autozone. 7mm - 30 shipped per set - 25 shipped lower price

13. heater core, used - 30 shipped - 25 shipped - lower price

14. Set of checker tails with turn signals on top and i think some wiring harness - In good shape - 40+shipping - 35+ shipping

Ill add more later and hopefully pics.

Im willing to take offers if you want more than one thing.

[datsun1973]

Would you consider selling the complete fuel injection, UIM, LIM, fuel rail, injectors, airbox, harness, and PCM off the 95? Shoot me a price shipped to Indiana 46062.

Thanks!
Andy
AndyandKelly77@Peoplepc.com

[fathead45]

off the 95 i would have to really think about it. I hate to pull apart a perfectly running motor. Off the 92 i would sell the stuff. the 92-95 are not much different. let me know. if you still want the stuff off the 95 i would like to try to sell it whole first.

[datsun1973]

I already have a 96 Longblock that I am going to rebuild so I just need the EFI. I thought the 95 was obd 1.5 and had a MAF sensor which was different from the 92? I'd take the EFI and sensors from the 95 and manifolds from the 92 if that would work too.

Thanks
Andy

[fathead45]

the 95 is odb 1.5. the 92 is odb 1. i think im gonna wait to pull the 95 motor apart. if you still want the manifolds off the 92 let me know, ill get pics up for ya.

[I-wear-pants]

Any chance you have a good set of 3.4 pistons you want to sell?

[fathead45]

yea in my 92, but if i did that i would like to sell it as a short block.

[tijuana_no]

i have sent you the money,sorry about the delay.

[fathead45]

its ok, all parts should go out tonight.

[fathead45]

everything is sent out, should be to ya in about 2-3 days ups.

3.4 motor is getting parted and tranny is sold.

[fathead45]

updated - added more parts

[fathead45]

Make some offers

[fathead45]

Lower prices, need to sell the fix my furnance.

[series8217]

Does the 92 DOHC motor have a front manifold with the AIR tube bosses? I know some of the early automatic ones got them, just with plugs in them instead of the tubes.

[fathead45]

nope sorry

Updated, Make some offers if you want more than one thing.