I have a ported and gasket matched top end with 3400 heads/ lower manifold and a 3500 plenum I need to get rid of. The heads are '170 castings from a '99 Grand AM, the lower is an '03 from an Impala and the upper is from a Malibu. Asking $280 obo.
Announcement
Collapse
No announcement yet.
Ported and Gasket Matched 3400/3500 top end
Collapse
X
-
Ported and Gasket Matched 3400/3500 top end
Last edited by 85maro; 10-03-2013, 09:05 PM.Increasingly I find the difference between a "fact" and an opinion is the number of people who believe it.
3.4 block converted to roller valvetrain with 220/225 cam on 115 lsa, '769' heads with 3500 valves, LS6 springs & porting, twin T04E turbos, 3500 plenum with ported 3400 lower & 'short star' 65mm throttle.Tags: None
-
Increasingly I find the difference between a "fact" and an opinion is the number of people who believe it.
3.4 block converted to roller valvetrain with 220/225 cam on 115 lsa, '769' heads with 3500 valves, LS6 springs & porting, twin T04E turbos, 3500 plenum with ported 3400 lower & 'short star' 65mm throttle.
-
Both are ported and asking $280 total as stated. If you need rockers and such I can get those too.Increasingly I find the difference between a "fact" and an opinion is the number of people who believe it.
3.4 block converted to roller valvetrain with 220/225 cam on 115 lsa, '769' heads with 3500 valves, LS6 springs & porting, twin T04E turbos, 3500 plenum with ported 3400 lower & 'short star' 65mm throttle.
Comment
-
No, this was done by a local shop called G&S.Increasingly I find the difference between a "fact" and an opinion is the number of people who believe it.
3.4 block converted to roller valvetrain with 220/225 cam on 115 lsa, '769' heads with 3500 valves, LS6 springs & porting, twin T04E turbos, 3500 plenum with ported 3400 lower & 'short star' 65mm throttle.
Comment
-
94 BerrettaZ26 3400,5 spd, aluminum flywheel, stg3+ spec clutch, poly mounts everywhere, strut and strut to rad braces, s&s headers, euro mirrors, and taillights, E36 headlights, blk widow spoiler, GTU rimz, intrax, KYB, OBD2 swap rear disk swap with ss lines and ss clutch line, addco rear bar
07 Chrysler 300 Base, with C frt bumper blk halo headlights and foglights. Coming soon tinted taillights and 22". The Family ride
Comment
-
DenverIncreasingly I find the difference between a "fact" and an opinion is the number of people who believe it.
3.4 block converted to roller valvetrain with 220/225 cam on 115 lsa, '769' heads with 3500 valves, LS6 springs & porting, twin T04E turbos, 3500 plenum with ported 3400 lower & 'short star' 65mm throttle.
Comment
Comment