Tweet
Regretfully I need to sell the one and only TCE ITB intake. These are all one-off machined pieces done artfully by Marc at TCE Motorsports. The TB's are 45mm, Oring sealed, the velocity stacks thread in and don't leak as well.
This will only fit a Gen 3 lower intake manifold. The lower adapter plates are ported out to the metal 3500 UIM gaskets (included). I would just simply blend the LIM's ports to match if you don't want to do a full port job.
You get what's in the picture plus all the bolts and extra Orings that I have for it. I'll also include a few 1:1 printouts of a template you can use to make your own filter box or scoop for the top.
The IAC motor and TPS are included. I'll also toss in the throttle cable that I used with this setup on my '89 Camaro.
Note that you will have to pick up a few NPT fittings for the center vacuum rail and configure your vacuum lines accordingly. You will also need to tune for them, AE is drastically different. As a courtesy i'll do my best to provide tuning assistance to the buyer.
With a healthy cam these will perform amazingly, My cam is pretty wild and I had no problem driving around town. Throttle response is instant and they sound awesome. I was able to get my engine to idle steady at 800 RPM, with a regular plenum it needs 1100 RPM to be happy.
The whole setup is bolted to a piece of wood, and that's how it will be shipped so you know how to put it together. It is possible to flip the center rail around to better fit your wiring or setup.
The price is $1,000 shipped and insured in the CON-US after paypal fees (4%), add a little extra for shipping to Canada.
I'm firm on the price, More pics upon request.
I'll also have a bunch of other stuff up for sale very soon, keep an eye out for new threads.
Thanks for looking!
This will only fit a Gen 3 lower intake manifold. The lower adapter plates are ported out to the metal 3500 UIM gaskets (included). I would just simply blend the LIM's ports to match if you don't want to do a full port job.
You get what's in the picture plus all the bolts and extra Orings that I have for it. I'll also include a few 1:1 printouts of a template you can use to make your own filter box or scoop for the top.
The IAC motor and TPS are included. I'll also toss in the throttle cable that I used with this setup on my '89 Camaro.
Note that you will have to pick up a few NPT fittings for the center vacuum rail and configure your vacuum lines accordingly. You will also need to tune for them, AE is drastically different. As a courtesy i'll do my best to provide tuning assistance to the buyer.
With a healthy cam these will perform amazingly, My cam is pretty wild and I had no problem driving around town. Throttle response is instant and they sound awesome. I was able to get my engine to idle steady at 800 RPM, with a regular plenum it needs 1100 RPM to be happy.
The whole setup is bolted to a piece of wood, and that's how it will be shipped so you know how to put it together. It is possible to flip the center rail around to better fit your wiring or setup.
The price is $1,000 shipped and insured in the CON-US after paypal fees (4%), add a little extra for shipping to Canada.
I'm firm on the price, More pics upon request.
I'll also have a bunch of other stuff up for sale very soon, keep an eye out for new threads.
Thanks for looking!
Comment