Wtb tce drtc!

[3400-95-Modified]

The way I look at it, is the stock setup is 180 from Ben... Then send out for Cryo... and right now it looks like I've been able to run that setup since 2009 till now Not much mileage though. SO to get something that would last longer than that, I'm willing to pay over 250 for. Especially since when the chain wears out you can buy a new one very easily and with this setup you will hopefully not experience wear on the gears due to the chain design.. vs the stock type of chain.

Maybe it will quiet down my motor some too... lol

[geldartb]

.
Maybe it will quiet down my motor some too... lol

once i replaced the tensioner pulley it made mine stop sounding like it had rod knock lol that was the stock virtually brand new tensioner i got with the 300 mile motor. didn't last that long, maybe 8 months of daily driving and then the rest was post cam install.

The way I look at it, is the stock setup is 180 from Ben...

forgot what i paid for my GM setup. i got all my stuff through gm parts direct a few years back and it was something around $150 IIRC. so $250 for some custom made gears and what not doesn't sound too bad to me.

[ericjon262]

ok guys, here's how it's going to work on the DRTC purchase the more people in, the better the price gets...

Qty. Unit Price
5 $428.75
10 $323.65
15 $288.70
20 $271.25
25 $260.50
30 $253.80

Prices include small flat rate priority mail shipping to the US. Shipping to Canada would be extra.

I need your help though, this is the only forum that I am on that deals in 60* motors, so I need help spreading the word so we can get the price down!

Thanks-

Eric

[TGP37]

I'm not pushing big power yet, but I will be very soon, so I don't want to play games with a elcheapo timing set.

Hot cam with more aggressive ramp, more lift, stronger springs, higher cylinder pressures against the exhaust valve.......not having a DRTC is what held me back on the turbo cam.

I agree, these engines are the type that will impact valves/pistons if that cheapo chain fails.


I can't invest in one yet but if the group buy is still coming together after the new year (tax time), count me in for sure. I would LOVE to have a DRTC. That would open up the turbo cam option.

it is a lot of money for these but the cost of repairing a failed stock chain, smashing pistons into valves......i don't want to think about it, lol.

[young gun]

ok guys, here's how it's going to work on the DRTC purchase the more people in, the better the price gets...

Qty. Unit Price
5 $428.75
10 $323.65
15 $288.70
20 $271.25
25 $260.50
30 $253.80

Prices include small flat rate priority mail shipping to the US. Shipping to Canada would be extra.

I need your help though, this is the only forum that I am on that deals in 60* motors, so I need help spreading the word so we can get the price down!

Thanks-

Eric

If we can get 10 orders I'm in. Especially with the payment set up as it spreads the money out a little more and I don't spend it all :P

[3400-95-Modified]

I'm in with 10 on board as well... Now we just need to find 4 more people.

[unchained01]

Somebody please make sure this gets posted on aleromod, GAOC and GAGT forums I am in on the "10" also

[young gun]

Somebody please make sure this gets posted on aleromod, GAOC and GAGT forums I am in on the "10" also

Already on GAGT, I'll throw it on GAOC...

[3400-95-Modified]

I'm trying to get a group purchase going now. Marc has not committed to anything yet, so it is still up in the air, but we have four now.


1 ericjon262 (myself)
2 unchained01
3 blckgagt
4 orangecky2k
5 geldartb
6 3400-95-Modified
7
8
9
10

Pricing:

Qty. Unit Price
5 $428.75
10 $323.65
15 $288.70
20 $271.25
25 $260.50
30 $253.80

Prices include small flat rate priority mail shipping to the US. Shipping to Canada would be extra.

if you want to be added to the list, PM me/reply here

You should add young gun to this list and we will just wait on the GB till there are 10 since most of us agree that price is much easier to swallow, and hell it may get better with being on GAGT and some other forums...

[ericjon262]

attn: all interested in the GP, please check the first post for updates!

[3400-95-Modified]

Posted on Bnet, but I wouldn't expect many orders from there... Not too many heavy engine mods being done. At least not many active members.

http://beretta.net/forum/viewtopic.php?f=13&t=10380&p=95013#p95013

[alpinestar10]

I may be interested not sure yet though since i may or may not be buying a new sunbird to swap a 3400 in.

[ericjon262]

Keep me posted on what happens, also, please LMK if you saw this on another forum!

[ericjon262]

if you want or need more than one, please let me know, that will get us closer to 10 faster!

[orangecky2k]

Anything new on this in the middle of my engine build and I dont want to have to take it all apart again to put the DRTC. would I not have to tear it apart again if i just turned the crank now while it is out? But if i do that and this dosent go through then i will be screwed unless i can find a used one. Are we waiting until there are atleast 10 ready to go?