Tweet
Heads sold! I also have a 3500 upper/lower for $125 and shipping and selling my nitrous system, good for 175 shot and has an automatic bottle opener with relays and whatnot for $275 and shipping. PM me if interested.
-
Last edited by 85maro; 09-11-2012, 11:11 PM.Increasingly I find the difference between a "fact" and an opinion is the number of people who believe it.
3.4 block converted to roller valvetrain with 220/225 cam on 115 lsa, '769' heads with 3500 valves, LS6 springs & porting, twin T04E turbos, 3500 plenum with ported 3400 lower & 'short star' 65mm throttle. -
May be interested depending on what happens to my car when I start it tomorrow... (Sucked in a PCV grommet.... couldn't believe it).
-
LMK with a PM when you're ready.Increasingly I find the difference between a "fact" and an opinion is the number of people who believe it.
3.4 block converted to roller valvetrain with 220/225 cam on 115 lsa, '769' heads with 3500 valves, LS6 springs & porting, twin T04E turbos, 3500 plenum with ported 3400 lower & 'short star' 65mm throttle.Comment
-
Bumpity.Increasingly I find the difference between a "fact" and an opinion is the number of people who believe it.
3.4 block converted to roller valvetrain with 220/225 cam on 115 lsa, '769' heads with 3500 valves, LS6 springs & porting, twin T04E turbos, 3500 plenum with ported 3400 lower & 'short star' 65mm throttle.Comment
-
BUMP?????Increasingly I find the difference between a "fact" and an opinion is the number of people who believe it.
3.4 block converted to roller valvetrain with 220/225 cam on 115 lsa, '769' heads with 3500 valves, LS6 springs & porting, twin T04E turbos, 3500 plenum with ported 3400 lower & 'short star' 65mm throttle.Comment
-
who did the porting any flow sheet on them to show how far opened up they are???94 BerrettaZ26 3400,5 spd, aluminum flywheel, stg3+ spec clutch, poly mounts everywhere, strut and strut to rad braces, s&s headers, euro mirrors, and taillights, E36 headlights, blk widow spoiler, GTU rimz, intrax, KYB, OBD2 swap rear disk swap with ss lines and ss clutch line, addco rear bar
07 Chrysler 300 Base, with C frt bumper blk halo headlights and foglights. Coming soon tinted taillights and 22". The Family ride
Comment
-
I did the porting, sorry no flow sheet. Gasket matching, bowl work and deshrouding was done.Increasingly I find the difference between a "fact" and an opinion is the number of people who believe it.
3.4 block converted to roller valvetrain with 220/225 cam on 115 lsa, '769' heads with 3500 valves, LS6 springs & porting, twin T04E turbos, 3500 plenum with ported 3400 lower & 'short star' 65mm throttle.Comment
-
any more info on the nitrous kit? wet/dry, nozzle sizes, bottle size, ect?Comment
-
Dry, 2 sizes 1 is a 50 shot fogger I was using on my last turbo critter, the other is a full 175. 10 lb bottle with 15 ft of braided hose to stash it in the trunk, NOS's funky fuel pressure management gizmo and a purge valve. I will post pics of it tomorrow.Increasingly I find the difference between a "fact" and an opinion is the number of people who believe it.
3.4 block converted to roller valvetrain with 220/225 cam on 115 lsa, '769' heads with 3500 valves, LS6 springs & porting, twin T04E turbos, 3500 plenum with ported 3400 lower & 'short star' 65mm throttle.Comment
Comment