Tweet
Ok so i have the following for sale: All prices are before shipping.
96,99+ PCM I can flash it with any stock or tweaked file you would like. $75-100 depending on what you want modified
Further more if you are in need of tuning locally please contact me via PM and we can discuss what you need.
105 lb springs. I bought these from Spartan GL in december. He did not know the brand. they have all but one of the retainers. i never installed these. I am going to go l76 springs and nolonger need these. $50
MAF housing from DOHC where i removed the cross blade for more flow. I have the MAF table that will calibrate this housing to a stock sensor. I used this housing when i set my 14.8 1/4 in my DOHC. $10 .
Gauge pod/cup $5 Sale pending...
TPS's for North Star/DOHC $5 for all of them.
adj fuel pressure regulator from DOHC both $5
Maf, tps, IAC connectors all $5
L36 Injectors working all six$5
DOHC gaskets $5 for both
96 DOHC ICM mount. this might work for coil pack swaps on the 3800... but not sure. $5
Ceelant necks from 3800 and DOHC $3 each
L67 Lower intake manifold $50 if you want it ported for an intercooler $75 and if you want it gasket matched to the LIM gaskets $100.
Used GMPP Sturt tower brace with install hardware. $20
95-99 Monte Carlo driver side window switch. *tested and working. *have 3. *$15 each.
98 L36/67 MAF works *$25
L67 Fuel Rail $10
LQ1/ DOHC Fuel Rail $10
Si Valves Intake and exhaust. full set, New never installed $150
the Turbonator!!! 2000hp in just 2 min. it survived a car fire and now it can be yours for only 39.99!!! act now and recive a resistor to push into your IAT for another 200 HP.
96,99+ PCM I can flash it with any stock or tweaked file you would like. $75-100 depending on what you want modified
Further more if you are in need of tuning locally please contact me via PM and we can discuss what you need.
105 lb springs. I bought these from Spartan GL in december. He did not know the brand. they have all but one of the retainers. i never installed these. I am going to go l76 springs and nolonger need these. $50
MAF housing from DOHC where i removed the cross blade for more flow. I have the MAF table that will calibrate this housing to a stock sensor. I used this housing when i set my 14.8 1/4 in my DOHC. $10 .
Gauge pod/cup $5 Sale pending...
TPS's for North Star/DOHC $5 for all of them.
adj fuel pressure regulator from DOHC both $5
Maf, tps, IAC connectors all $5
L36 Injectors working all six$5
DOHC gaskets $5 for both
96 DOHC ICM mount. this might work for coil pack swaps on the 3800... but not sure. $5
Ceelant necks from 3800 and DOHC $3 each
L67 Lower intake manifold $50 if you want it ported for an intercooler $75 and if you want it gasket matched to the LIM gaskets $100.
Used GMPP Sturt tower brace with install hardware. $20
95-99 Monte Carlo driver side window switch. *tested and working. *have 3. *$15 each.
98 L36/67 MAF works *$25
L67 Fuel Rail $10
LQ1/ DOHC Fuel Rail $10
Si Valves Intake and exhaust. full set, New never installed $150
the Turbonator!!! 2000hp in just 2 min. it survived a car fire and now it can be yours for only 39.99!!! act now and recive a resistor to push into your IAT for another 200 HP.
Comment