For Sale : 3500 Complete Boost Race Topend WISECO FORGED

[farmerz24]

For sale I have a 3400 heads and LIM, 3500 UIM. and custom wiseco pistons.

pics seen here:

http://s954.photobucket.com/albums/ae27/farmerz24/Parts/

All this stuff is brand new, never used (with exeception of the heads+manifolds i sent Ben before the work was done).

Heads - 3400 Race Boost ported by WOT-TECH, stainless steel valves( i think bigger valves), new valve seats, LS6 springs,
modded gold race rockers with modded guide plates to work with 3500 heads, comp custom pushrods for comp custom boost grind cam.
custom MLS head gaskets -2 gaskets.
ARP main and head studs, longer main studs to allow windage tray to work.
also ported WOT-TECH lower3400intake and ported 3500 upper.

Pistons - 8 custom made wiseco 9.0:1 forged pistons for 3500.
2 extra. complete with rings, locks etc. $1000 from wiseco.

Id like to sell everything complete, OR sell the HEADS with complete valvetrain+cam , PISTONS, and lower+upper intake.

3000 shipped for everything.


Ben may correct if i have the specs wrong. can also email me at ctataryn700@hotmail.com

http://s954.photobucket.com/albums/ae27/farmerz24/Parts/

[SappySE107]

You have 3400 heads, not 3500. The heads do not have bronze valve guides, and the springs are LS6 because your race cam only needs LS6 springs. This is the best flowing top end you can buy, hence 3400 and not 3500 heads and lower The gold race rocker set is unmodified, plus 4 rockers that are modified. Main studs are not for a custom girdle, they are long enough for the windage tray to be used once the holes are opened up to the stud size.

[Mars]

Jesus i want those pistons...

Bump.

[farmerz24]

thanks ben for the corrections.
its been a while.

[MidnightriderZ24]

thanks ben for the corrections.
its been a while.

damn i want the rockers..

[farmerz24]

step up.
need to sell.

[farmerz24]

anyone? make offer

[unchained01]

please post the specs of the cam please since its a custom grind

[SappySE107]

it isn't custom, its the street/strip turbo cam. Also the heads are stock size valves.

[unchained01]

Ok Ben. Thanks l will look it up

[jt350]

What's best price you can do on the heads,cam .valve train,lim and uim? Where are you located?

[MY91GT(Z)]

interested in the heads and lim as i have ported upper already

[unchained01]

any news on this ?

[farmerz24]

everything still for sale. there is some interest however.

im trying to sell the heads/valvtrain/cam as one package and the pistons as another, i dont want to break it up past that as of this point in time.

please make an offer on the stuff you want, either here or PM.

[NateD4]

What bore are the pistons?

What is the flow difference between a 3400 and 3500 head?