3400 Metal Coolent Rail

[slinky]

i need one off a 3400 engine that has WORKING BLEEDER SCREW
(steel pipe that goes from top of water pump to heater core)

Mine bleeder is seized and i cannot bleed the air from my cooling system.

Please send pix and a price shipped to 15666 to my email Phel0z@yahoo.com

[HOYS]

The heater tube is specific to the vehicle...not the engine. IIRC almost all FWD 60deg heater tubes will work with any engine.

What car are you putting this on?

Doorman also sells the bleeder screw in the HELP! section at a local FLAPS. Is the screw seized in the "tower" or is the bleeder screw portion on top seized?

Shameless plug:

Milzy Motorsports sells these tubes powdercoated with the TB coolant lines bypassed for 40 bucks + shipping. I'v had mine for a year and even with the 3500 swap...it gets noticed the most since they are usually all rusted out POS'.

[slinky]

is this what i need?

http://www.dormanproducts.com/p-20810-902-112.aspx

[HOYS]

Thats it!

[slinky]

Well now my problem is getting the seized fitting out of the rail

[pocket-rocket]

Worst case, take it off the car and drill and tap it, but lets hope it doesn't get that far. Some heat from a propane or MAPP torch might help pursued it out, though.

[Daguse5853Z]

vice grips FTW!