WTB 2.8/3.1 Cav engine mounts,Isuzu mounts etc.

[Fierobuffoon]

Ok, after you stop laughing, Anyone have some motormount brackets for a 1st or 2nd gen cavalier?, also looking for an Isuzu trans upper mount and rear torque bracket for the 5 spd 4cyl car?

i know most folks probably threw theirs away.

I have parts, injectors and doo-hickeys from up to 2000My Gm fwd's,, just no older parts cars to trade or barter with.

thanks for looking

[alpinestar10]

wait can you get pics of what you need i have some five speed specific motor brackets for a cavalier on the passenger side the one that attaches to the body and the one that attaches to the engine

[Fierobuffoon]

wait can you get pics of what you need i have some five speed specific motor brackets for a cavalier on the passenger side the one that attaches to the body and the one that attaches to the engine

Ack, My scanner is broken, I have the GM Shop manual, so i know what they look like, question is do you have the ability to take and post a pic of them?

I am interested, the less parts i have to fabricate the sooner i can put the Project on the ground

[alpinestar10]

I can take pics of them but my adapter is broken ill see if i can find pics on v6z24.com

[Fierobuffoon]

heck just describe them, one should be longer than the other on the passenger side and the trans part should be U shaped

[alpinestar10]

Seven pics down are these the brackets your looking for? http://www.v6z24.com/jbodyforum/turb...start,195.html

[alpinestar10]

I believe i have the trans mount to but not for a isuzu

[Fierobuffoon]

Seven pics down are these the brackets your looking for? http://www.v6z24.com/jbodyforum/turb...start,195.html

those are the passenger side mounts and equal lenght half shaft deal.

[alpinestar10]

So its not the ones you looking for? And the halfshaft is in the pics cause its the only one i could find on v6z24.com
i have the same exact mounts in my room though, and the mounts and halfshaft in that thread are also mine since i have bought that car, If thoses are not the brackets you looking for help me out i can get almost anything you need

[Fierobuffoon]

So its not the ones you looking for? And the halfshaft is in the pics cause its the only one i could find on v6z24.com
i have the same exact mounts in my room though, and the mounts and halfshaft in that thread are also mine since i have bought that car, If thoses are not the brackets you looking for help me out i can get almost anything you need

Ok,yes those are the ones im looking for!, just not the half shaft,i am going from the 2.0 to a 3.1 and auto to stick, and i have the engine, and trans and 99% of the parts just not the mounts, I can make the trans ones, which it look slike i may do, and call my buddy out in Ca and hope he can find me some other ones.

Its nice to have the stock brackets ,y a know? lemme know if you can find those?