Tweet
Still have some things left. All are from my 92 Z24 unless otherwise noted. Most are listed here also http://www.zrracing.com/forsale.htm
Chip (with ECM), no top speed governor. 92 Z24 manual. No top speed governor and more power to boot. This is out of my 92 Z24 with a manual trans. Chip is aggressive, requires 91 or better octane fuel. Increased fuel millage while cruising 3-4 mpg. $100
Rear springs, custom made (meaning there is one set in existence), about 1" 1-1/2" lowering from OEM, 800lb spring rate, 550lb wheel rate, these are very stiff you will want coil overs for the front with these. $75
Rear sway bar, 26mm. $75
Rear sway bar and springs together $124. These to get will make your car turn much better than any after market stuff. Also help launching at the drag strip. Made for my Z24, will fit J-cars from 85-94 and probably of others.
MPFI 3.1L ported heads, upper and lower intake, and 56mm throttle body - $249
Workshop manual 1992 Cavalier/Z24 on CD. Is AllDATA, like AutoZone sells but on CD and no expiration date. - $15
Stock Z24 strut tower brace. - $25
3.1 Exhaust manifold set - $50
3.1 Coil pack with module and Magnacor wires - $50
Stuff not from my Z24;
Also have a bunch of 3100 and 3400 parts. 1999 to 2002ish. Castings, sensors, EGRs, pulleys, and so on. Some are listed on the aforementioned web page.
Chip (with ECM), no top speed governor. 92 Z24 manual. No top speed governor and more power to boot. This is out of my 92 Z24 with a manual trans. Chip is aggressive, requires 91 or better octane fuel. Increased fuel millage while cruising 3-4 mpg. $100
Rear springs, custom made (meaning there is one set in existence), about 1" 1-1/2" lowering from OEM, 800lb spring rate, 550lb wheel rate, these are very stiff you will want coil overs for the front with these. $75
Rear sway bar, 26mm. $75
Rear sway bar and springs together $124. These to get will make your car turn much better than any after market stuff. Also help launching at the drag strip. Made for my Z24, will fit J-cars from 85-94 and probably of others.
MPFI 3.1L ported heads, upper and lower intake, and 56mm throttle body - $249
Workshop manual 1992 Cavalier/Z24 on CD. Is AllDATA, like AutoZone sells but on CD and no expiration date. - $15
Stock Z24 strut tower brace. - $25
3.1 Exhaust manifold set - $50
3.1 Coil pack with module and Magnacor wires - $50
Stuff not from my Z24;
Also have a bunch of 3100 and 3400 parts. 1999 to 2002ish. Castings, sensors, EGRs, pulleys, and so on. Some are listed on the aforementioned web page.