Announcement

Collapse
No announcement yet.

turbo grand am demod

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    turbo grand am demod

    well..the time has come a lil sooner then i thought..time to get rid of this car, i have too much going on in my life to even think about puttin the time or money into it anymore..all prices are NOT shipped
    -----------------------------------------------------------------------------------------------------
    t3/t4 turbo kit...63ar turbine...70 compressor..ran a 13.6 in the quarter, without a tune on a stock cam on 9 pounds boost.3in. downpipe, 2.5 in intercooler piping..will come with half in phenolic spacer for the upper and lower intake plenums so the wastegate will clear throttlebody.one of the bottom mounts is broken off the intercooler but can be welded back on.$2000

    tce 65mm t.b from 60degree v6 $180
    zzp 42.5 pound injectors..will come with harness with right connectors so they will be plug and play, just need to reprogram pcm for larger injectors. $175

    60degreev6 stage 3 turbo cam..excellent condition ran for 10k miles at most $250

    3 gauge pillar pod tan in color $40

    2 torque star wheels, was gonna use them for drag radials...scratch that idea..$80

    complete body...minus transmission or engine$1000
    whomever buys the body, YOU will be responsible to pick it up.title in hand

    i will part out the body if i have no takers on it..then it will go to the junkyard
    Attached Files
    Last edited by BoostED00GagT; 11-24-2010, 12:16 AM.
    00 turbo'd gagt msd 8.5 mm wires,ngk tr-6 plugs,42.5lb inj,65mm tce t.b,ported upper intake,ported lower,ported heads,copper headgaskets,headstuds,160 stat,ls6 valve springs,st3 turbo cam and pushrods,turbo manifolds,custom 'y' pipe,3in open d.p.,dhp powr tuner,garret t3 60-1 .63 turbine,70 compressor,6 pounds of boost...STOCK CAM,STOCK 103XXX BOTTOM END...2.041 60',13.683 @ 100.34

    99 gtp 4in. F.W.I...180 stat..headers...104's...msd8.5's..1.9's...3.4 pulley...cat & res./
    Tags: None
  • #2
    Might want to lower the price on the TB, you can buy them new...assembled for 10 bucks less.

    Comment

    • #3
      hm, ok, guess i havent looked at how much they were ina while, were damn expensive when i bought it...thanks
      00 turbo'd gagt msd 8.5 mm wires,ngk tr-6 plugs,42.5lb inj,65mm tce t.b,ported upper intake,ported lower,ported heads,copper headgaskets,headstuds,160 stat,ls6 valve springs,st3 turbo cam and pushrods,turbo manifolds,custom 'y' pipe,3in open d.p.,dhp powr tuner,garret t3 60-1 .63 turbine,70 compressor,6 pounds of boost...STOCK CAM,STOCK 103XXX BOTTOM END...2.041 60',13.683 @ 100.34

      99 gtp 4in. F.W.I...180 stat..headers...104's...msd8.5's..1.9's...3.4 pulley...cat & res./

      Comment

      • #4
        bummmp. noones moddin their 3400's anymore?
        00 turbo'd gagt msd 8.5 mm wires,ngk tr-6 plugs,42.5lb inj,65mm tce t.b,ported upper intake,ported lower,ported heads,copper headgaskets,headstuds,160 stat,ls6 valve springs,st3 turbo cam and pushrods,turbo manifolds,custom 'y' pipe,3in open d.p.,dhp powr tuner,garret t3 60-1 .63 turbine,70 compressor,6 pounds of boost...STOCK CAM,STOCK 103XXX BOTTOM END...2.041 60',13.683 @ 100.34

        99 gtp 4in. F.W.I...180 stat..headers...104's...msd8.5's..1.9's...3.4 pulley...cat & res./

        Comment

        • #5
          willing to part the top end???
          94 BerrettaZ26 3400,5 spd, aluminum flywheel, stg3+ spec clutch, poly mounts everywhere, strut and strut to rad braces, s&s headers, euro mirrors, and taillights, E36 headlights, blk widow spoiler, GTU rimz, intrax, KYB, OBD2 swap rear disk swap with ss lines and ss clutch line, addco rear bar

          07 Chrysler 300 Base, with C frt bumper blk halo headlights and foglights. Coming soon tinted taillights and 22". The Family ride

          Comment

          • #6
            top end as in the intakes and heads?
            00 turbo'd gagt msd 8.5 mm wires,ngk tr-6 plugs,42.5lb inj,65mm tce t.b,ported upper intake,ported lower,ported heads,copper headgaskets,headstuds,160 stat,ls6 valve springs,st3 turbo cam and pushrods,turbo manifolds,custom 'y' pipe,3in open d.p.,dhp powr tuner,garret t3 60-1 .63 turbine,70 compressor,6 pounds of boost...STOCK CAM,STOCK 103XXX BOTTOM END...2.041 60',13.683 @ 100.34

            99 gtp 4in. F.W.I...180 stat..headers...104's...msd8.5's..1.9's...3.4 pulley...cat & res./

            Comment

            • #7
              are you looking to just sell those headers? pm me a price

              Comment

              • #8
                how long will you be holding on to this stuff, i will be interested in the throttle body but it wont be for a while.
                2004 Monte Carlo LS
                Build Thread
                Youtube Channel
                ^Add and Sub & I'll Return The Favor^

                Comment

                • #9
                  im looking for the head up lmk a price
                  94 BerrettaZ26 3400,5 spd, aluminum flywheel, stg3+ spec clutch, poly mounts everywhere, strut and strut to rad braces, s&s headers, euro mirrors, and taillights, E36 headlights, blk widow spoiler, GTU rimz, intrax, KYB, OBD2 swap rear disk swap with ss lines and ss clutch line, addco rear bar

                  07 Chrysler 300 Base, with C frt bumper blk halo headlights and foglights. Coming soon tinted taillights and 22". The Family ride

                  Comment

                  • #10
                    how much for just the turbo and manifolds/upipe?
                    Jeff Ianitello
                    Engineered Performance
                    Atlanta, GA.

                    Comment

                    • #11
                      Do you still have that red SCT hood and the stage 3 cam.
                      1990 6000 SE AWD 3.1 "The Goose"
                      1995 Beretta Z26
                      1996 Beretta Z25 w/3500
                      1999 GAGT

                      Comment

                      • #12
                        pm sent for the TCE TB

                        Comment

                        • #13
                          u have a PM
                          ported 3500 heads, LIM, plenum, 28# TB FI's, TCE 65 mm TB, MPR CAI, F&R strut bars, F&R sway bars, Eibach springs, KYB GR2's, TOG headers, hi-flow cat, Borla muffler and tips, LC-1 WBO2, DHP PT

                          Comment

                          • #14
                            What do you have left from this sale? Looking to turbo my 91 3400 5spd. beretta. Thanks!

                            Comment

                            • #15
                              Never got a pm back, he has not been back for the past 23 days.

                              Comment

                              Previous template Next
                              Working...
                              X