WTB: 93-95 3100 Pushrods

[Maverick H1L]

I'm looking for a set of pushrods for the 93-95 NON-ROLLER 3100. Only 3100 engines I can find in the usual yard aren't to be touched as they run. I can't go too much farther with my hybrid build without the pushrods.

And I'd also be interested in a pic of an emissions hose routing sticker for the same year. My engine parts came in pieces off of a junk engine without a sticker, so I know where nothing goes.

[19Cutlass94]

I have an extra set of pushrods, but I cant remember if they are roller or not. Ill get back to you on that.

[ForcedFirebird]

Is there a reason you don't just buy them from the parts store? IIRC they are about $27 for the set new from Sealed Power.

[Maverick H1L]

Just picked up a set from eBay last night for $15... Didn't know I could get a full set from the parts house .

[Superdave]

the non roller and roller 3x00's all use the same pushrods.


GM lists 93-99 and then 00+ but the new part number replaced the old ones so it's basically '93-'04

10166354 for the exhaust
10166355 for the intake

[bszopi]

Weren't the non-roller ones hardened, since they'd be rubbing against the guides? That's just what I remember...

Sent from my Devour using Tapatalk

[Superdave]

they must all be hardened then.. weird

[Maverick H1L]

Got them yesterday and put 2 in the #1 cylinder, which I currently have set up for adjustable studs with the old standard rockers (as in my old heads), and they seem to work the way they are supposed to. The real test will be if they work with the 3100 roller rockers and pedestals . I'll get pics soon.