Wanted 60*V6 flywheel/clutch bolts

[gpchris]

I'm looking for the 6 bolts that bolt the flywheel to the crankshaft AND the 6 bolts that bolt the pressure plate to the flywheel. Need these asap! Tia

[60dgrzbelow0]

Try calling either of these folks...they should have what you need...

http://headbolts.com/buick-GM-V6.html

http://www.jegs.com/p/ARP/ARP-Flywheel-Flexplate-Bolts/744956/10002/-1?sendroiad=2447928309&sendroikwd=arp%20flywheel%20bolts&gclid=CKDupIHqr6ACFdpe2goddi1JSw&sendroicid=bbef8492-2d00-41d6-b158-38db0de2603c

[MidnightriderZ24]

pressure plate bolts just go to a parts store and pick some up. metric 10.9's will be perfect. flywheel bolts are gonna be tough to get.

[3400beretta]

Go to the dealer.

[RedBird]

uh...

http://wot-tech.com/shop/all/arp-fly.../prod_165.html

[MidnightriderZ24]

uh...

http://wot-tech.com/shop/all/arp-fly.../prod_165.html

yeah the title says flywheel bolts, but the item description says flexplate.. HUGE difference as we know... maybe ben can clear this.

[SappySE107]

Same bolt.

[MidnightriderZ24]

flexplate bolts are alot shorter than 5 speed flywheel bolts. if the bolts in the store are the longer flywheel bolts, i would LOVE to get some!

[SappySE107]

Im sure you have seen more flexplate and flywheel bolts than anyone on this site.

[MidnightriderZ24]

ok, taking what i say out of context to apply to this doesnt mean anything. i was simply stating the title of the item says flywheel bolts, then the item description says flexplate. when clearly flywheel bolts are LONGER. there has been a few people who ran the shorter flexplate bolts and had issues on a flywheel. im trying to figure out which bolts they are?

[SappySE107]

They work with both.

[MidnightriderZ24]

im just curious cuz ive wanted to buy them, but wasnt sure if they were either, or. if they work with both then thats great, another worthwhile upgrade for sure.

[RedBird]

phew. had me worried for a second.... since i used these on my flywheel :P i need to get the pan side bolts, too.

Hey Ben, maybe you should change the description to say flywheel and add a note at the bottom that says will also work with automatic flexplates

[gpchris]

The flywheel bolts ARE different than the flexplate bolts. Just putting that out there. I would bet my life on it.

Thanks to whoever said I can get a universal 10.9. I'll hit fastenal tomorrow. Even if I have to pay 4 dollars per bolt at the stealership atleast I'll only need the six flywheel bolts.

[IsaacHayes]

Flywheel bolts are 11.9 grade IIRC. Fine thread but no idea what it is. 10.9 for pressure plate and are coarser thread compared to flywheel ones.