Tweet
Just the heads, no valvetrain, looking for good condition, P&P a plus but not necessary, looking to pay ~$100 for a decent set, maybe more if they're P&Ped.
-
I have a set of 3400 heads (they are assembled with valves, springs and whatnot), but I wouldn't trust 'em without disassembly and a good cleaning and replacing the valve seals). Where are you located?Matt
2000 Oldsmobile Alero GLS sedan
3400/3500 hybrid, Diamond Racing forged pistons, Scat I-beams, TCE DRTC, ported heads, WOT Race cam, PAC 1518s, Manley valves, F40 6-speed with Quaife LSD -
I just want the heads....Originally posted by mfuller View Post
Non assembled, ie. no valves, no valve springs, no pushrods, no rocker arms, no lifters, no seals or seats.....I don't want to pay for stuff I'm not going to use, the setup I'm going to be running requires high end components to match the cam I'm getting, the stock valvetrain just won't take the abuse the cam will throw at it, especially not at 7k rpm, not to mention valve float....Comment
-
Not to be a PITA but evidently I'm good at that.
Ben stopped selling ported 3400 heads for the most part, for a reason!
Too bad with a 2.8 you are stuck with bore restrictions.
FWIW!Comment
-
To the best of my knowledge my 2.8 block won't take 3500 heads......Originally posted by asylummotorsports View PostComment
-
To the best of my knowledge I still sell ported 3400 heads.Ben
60DegreeV6.com
WOT-Tech.comComment
-
How much are they per set? And how much of a flow increase is the porting on them?Comment
-
Ben lists all the stock and ported flow #'s
I have a set of unmolested 3400 heads, bare, one rocker arm stud boss (10mm) needs a heli-coil - but don't know if I want to get rid of them, or use them for some flow testing...Comment
-
where are you located.
i still got my 3400 heads in the garage.sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
-
Pittsburgh, PA, do you have a picture so I can see the condition? And how much do you want for them?Comment
-
i have set also ill sell for 100 shipped complete minus the rockers94 BerrettaZ26 3400,5 spd, aluminum flywheel, stg3+ spec clutch, poly mounts everywhere, strut and strut to rad braces, s&s headers, euro mirrors, and taillights, E36 headlights, blk widow spoiler, GTU rimz, intrax, KYB, OBD2 swap rear disk swap with ss lines and ss clutch line, addco rear bar
07 Chrysler 300 Base, with C frt bumper blk halo headlights and foglights. Coming soon tinted taillights and 22". The Family ride
Comment
Comment