Announcement

Collapse
No announcement yet.

Indy Beretta part out, roll cage, and g6 6spd

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • For Sale : Indy Beretta part out, roll cage, and g6 6spd

    Parting out my Indy Beretta because I don't feel the car will be a good platform for what I am looking to accomplish. I would have reassembled it, but the engine, trans, carpets, and headliner are long gone and she is mostly in pieces right now. If you need any parts listed just ask, and I will see what I can do for you. Fenders,doors, trunk lid, and hood aren't in bad shape if you need sheet metal(either no rust or surface only), but they will need paint as the clear is flaking off. Most of the larger items I would prefer pickup. I am located in Northeast Ohio near Canton/Akron area. Prices are just coming off the top of my head so if anyone feels they are out of place please let me know.

    GTU/Indy front lip- Its been repaired with fiberglass due to some cracks it had when I received it. It will need paint before it can be installed. I built up the backside with a lot of fiberglass to add some strength to it. Looking for $100 obo.

    Indy/GTU Front Sway bar and strut brackets just add endlinks and bushings-$100-Sold

    Indy GTU mirrors (2 pairs available)-$45 per pair -SOLD

    Indy/GTU Side skirts with brackets-$80(2 other sets available without brackets for $45 per pair)-Only 1 pair without brackets left

    Indy wheels with tires complete with center caps-$150 SOLD

    Indy spoiler(a couple of the mounting tabs are missing)- $40 SOLD

    GTU spoiler-$50

    Right and left headlight set-$20 (2 pairs available with bulbs in them, but can't guarantee bulbs are good) 1 Set left

    Eggcrate grill(2 available)-$10 1 left

    Moonroof glass(2 available)-$25 SOLD

    Gtu/Indy digital cluster-$40 SOLD

    Brand new Pontiac g6 6spd with low mileage clutch and flywheel(about 4k miles)- $450obo

    12pt Jegs un-welded roll cage kit(needs 2 mounting plates which are just 6x6x1/8 mild steel plate that can be had from a local metal supplier)-$180 obo(sold)


    Pictures will be coming either later today or tomorrow.
    Last edited by Nightingale; 06-17-2009, 07:21 PM.
    98 camaro swapping in lz9 th400 setup
    LZ9 specs: (Subject to Change work in progress)
    4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

  • #2
    Here is the album containing pictures of most of the parts I have for sale.
    Store your photos and videos online with secure storage from Photobucket. Available on iOS, Android and desktop. Securely backup your memories and sign up today!
    98 camaro swapping in lz9 th400 setup
    LZ9 specs: (Subject to Change work in progress)
    4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

    Comment


    • #3
      i want the sides and rear bumper pcs shipped to 14615 lmk how much
      94 BerrettaZ26 3400,5 spd, aluminum flywheel, stg3+ spec clutch, poly mounts everywhere, strut and strut to rad braces, s&s headers, euro mirrors, and taillights, E36 headlights, blk widow spoiler, GTU rimz, intrax, KYB, OBD2 swap rear disk swap with ss lines and ss clutch line, addco rear bar

      07 Chrysler 300 Base, with C frt bumper blk halo headlights and foglights. Coming soon tinted taillights and 22". The Family ride

      Comment


      • #4
        Also have the 7730 ecm if anyone is interested.. $50???
        98 camaro swapping in lz9 th400 setup
        LZ9 specs: (Subject to Change work in progress)
        4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

        Comment


        • #5
          Got more availible then what is listed here. I have alot of odds and ends from the beretta. Just ask never know...
          98 camaro swapping in lz9 th400 setup
          LZ9 specs: (Subject to Change work in progress)
          4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

          Comment


          • #6
            interested in roll cage. how many mounting points? need for dirt car(91 retta gt).?how much to ship to york,pa.?i also would like a beefed up 3.1 or one that looks like a 3.1ready to drop in.

            Comment


            • #7
              Its a 12pt cage kit that extends through to the strut towers so it should off a fair amout of protection. The tubing is all mild steel as opposed to chrome moly because for 1) CM is more expensive, 2) I've heard chrome moly is no good after taking a good hit(metal fatigue). The stock motor and trans is one thing I don't have. I got rid of that in anticipation of dropping in my lz9, but alas thats not happening. I will check around for some freight quotes. Right now I need to report a damn craigslist scam. Someone sent a bogus check expecting me to cash it, and transfer the left over cash.
              Last edited by Nightingale; 05-01-2009, 10:03 AM.
              98 camaro swapping in lz9 th400 setup
              LZ9 specs: (Subject to Change work in progress)
              4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

              Comment


              • #8
                shipping on roll cage to 57701

                S...........L...........E...........E...........P...........E...........R

                Comment


                • #9
                  interrested in the front and ( if any) rear lip. how much for both?
                  Mike 60degree addict.
                  Beretta 96 3500 - 14.981@ 93.32
                  sigpic
                  65MM thorttle body, Crank trigger 97 venture ECM and Dhp powrTuner

                  Comment


                  • #10
                    Looking for 125+shipping for front lip + rear skirts. I believe your looking for the 2 rear skirts that attach to the rear bumper?

                    I'll have to do some more freight quotes for the rollcage, but so far the best I could do was terminal to terminal through yellow at 185. Thats in response to both JT350 and Kwhauck as the price was the same via yellow(within 3 dollars).
                    Last edited by Nightingale; 05-02-2009, 09:10 AM.
                    98 camaro swapping in lz9 th400 setup
                    LZ9 specs: (Subject to Change work in progress)
                    4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

                    Comment


                    • #11
                      12pt. rollcage

                      i'll take that cage if still avalible,and offer of 160.00 is good for you.e-mail me at jtyson2140@comcast.net to work out detail's.hope to here from ya! thanx!

                      Comment


                      • #12
                        Very interested in the 6speed parts. Could you take a couple pics?

                        -GREEN 1995 Pontiac Grand Prix SE - L82/5spd MTX +
                        -White 1995 Pontiac Grand Prix GTP - 97 207DOHC/6SPD MTX +

                        Comment


                        • #13
                          got a tube intermediate-shaft?

                          Comment


                          • #14
                            , and sry I don't have the beretta tube intermediate shaft(had an auto tranny in it stock).

                            6spd parts pictures below, and if you have any specific pictures you want let me know.


                            98 camaro swapping in lz9 th400 setup
                            LZ9 specs: (Subject to Change work in progress)
                            4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

                            Comment


                            • #15
                              Bump!
                              98 camaro swapping in lz9 th400 setup
                              LZ9 specs: (Subject to Change work in progress)
                              4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

                              Comment

                              Working...
                              X