Free engine parts

[Keoki1978]

I got a few sets of heads I need gone. And some other stuff too..

95 TDC heads.. Some guy brought these in and desided against it. They are free. Just pay shipping.

95 3100 heads.. These were mine, I just dont want em anymore..

3100 roller cams.. I have 2 of these from 2 different motors, the 2000 and up.

4T60E tranny from my 95 GAGT.. Just pay shipping and its yours..

2002 3100 heads.. These are the spare set I have, was gonna port em but there yours for $50..

90ish 3.1 heads.. These been ported to hell and back, I took the valves out. These were gonna be the heads I was gonna use on my motor but I didnt like the manifold. These are free...

My zip is 33614 so guess the weight and figure shipping and its yours..

[1988GTU]

How much for those ported 3.1 heads shipped to 48082? Have they been surfaced/decked/ or shaved? Who ported them? Have any pics or flow bench charts?

[Keoki1978]

They have been shaved about .010 off the surface, porting was dont by our main guy at the shop, Donny, and they were flowed, but since I work there, I didnt get the royal customer treatment that would include a print out of each individual cylinder. I was told what they flowed, its been almost 3 years.

I'd rather you figure out how much they cost to ship since I am giving them away. I included my zip so you can contact UPS and question them, then get back to me and I'll get them out for you. I cant be doing any foot work on this cause I got a few PM's already for the things I listed....

[robertisaar]

how much do you think the heads for the 95 3100 weigh? i took a guess as 40 pounds and typed it into the USPS calculator and came up with about $5.

[1988GTU]

I am going to need the size of box and lbs for me to do the "foot" work.

[robertisaar]

1988gtu is right about that, i just took some numbers of what i assumed to be right for my quote, but i'm confident about size...weight on the other hand?

[Keoki1978]

Those 3100 heads along with the 3.1 heads weigh about 15 pounds each, and measure about 15 inches long, 8 inches wide with the exhaust studs by 6 inches high each. Hope that helps. Those twin dual cam heads, dont ask. Those things weigh a ton.. The cam towers and everything, these things are tall as hell...

[bve32k]

I have sent DOHC heads before. Sent them from Mi to AZ. Costed me about $23 to ship via UPS. Residential too.

[Keoki1978]

K, so figure maybe 20-30 to ship then if interested, like I said, these are free ecept the gen 3 3100 heads. I might deside to keep those. 1 cam is gone, its being put in the mail tomarrow. Shipping was $12, so not bad for a gen 3 roller cam for 12 bucks..

[choppester]

did you say you are giving away 3.4 dohc heads?