Wanted Garrett T3 .48 Exhaust housing

[91z24build]

I am in need of a Garrett T3 .48 A/R 5 bolt exhaust housing that is the standard Garrett part (not the mopar type).

Diff ratios may work I'm not sure.

I dont know a whole lot about turbo internals, I have a stock T3 from a 2.2 Mopar, I just need a housing that the regular Garrett wastegate assembly will fit (standard 5 bolt garrett wastegate wont fit the mopar style T3).

Let me know if you may have one that will work. Thanks

[project89]

dbl post

[project89]

i have one but its attached to a t3 50 trim turbo lol

worth it to buy the whole assembly?

[91z24build]

I'm trying to find just the housing since I dont have much to spend.

But if its a runnable turbo, and the price is right... well you know how it works.

It must be made for the standard 5 bolt wastegate assembly, I baught a special 5 bolt V-band adapter and the stuff to make it work only to find out it wouldn't fit my (mopar) turbo.

This is what it must fit, the bolts measure 3 5/8" center to center across, and 5" from the bottom hole to the top left hole (as pictured).

[project89]

it has a 5 bolt flange but i think there are 2 diff 5 bolt flanges???
slight lil crack on the edge of the wastegate hole but thats common and it would go away if u ported it.
i had 2 of these but one was no good and i threw it out like an idiot
ill get a picture of the hotside for u tommorow so u can make sure its the right one

turbo can be bolted on and run
had a guy who does gn turbos check it out for me
turbo is water and oil cooled

[project89]

just saw ur picture pretty sure thats it.i will take apic and dbl check for ya tom

[project89]

i brought the turbo home with me from work soon as i find somethign to mesure the bolt spacing with ill let ya know if its the right one

[project89]

just measured
i got 3 5/8 across the turbine wheel center to center
and 5 inch across center to center

[91z24build]

Awsome, send me a PM and let me know what you want for it. If I dont get it my buddy offered me a brand new XS Power T04E for $150.00 but i'll have to fab up a wastegate on it.

[project89]

pm sent

[loner666]

I have one but its a .63ar. Might be better suited for you then the 48 i would think. PM me and Ill work a deal with you