WTB - 3.4 DOHC Front Cover

[lkurek]

Grrrr..... Ok, my replacement of the 3100 to 3.4 DOHC is *almost* ready to fire up. Buttt.....get this. I was installing the passenger side axle and some suspension crap, when I noted coolant under the car. I had filled it up the day before, so I thought I has spilled.... Well, no. It was still dripping off the crank pulley.....SOAB!!! After digging into it, I had to pull the timing crap off the front of the engine (which was a piece of cake to do when the engine was on a stand, not so easy in the car)....I found the problem. A crack in the front cover and the coolant was seeping out of it! Seriously.....a hairline crack with seepage. Short of pulling the cover to weld it up.....does anyone have a cover they can sell? I also need a new plastic front belt cover, as I cracked it taking it off too....

Any help appreciated!

BTW, this is a 96 engine, if it matters......

Thanks!!!!

[lkurek]

bump.....I really need a new cover.....help!

[SappySE107]

Only spare i have is 91-93. I know the 24x sensor stuff isn't there.

[gpchris]

i have one 95 and one 97 let me know witch you want

[lkurek]

PM sent to you Chris....

Sappy....as always, thanks for your input. I didn't know about the change for the 24x sensor, so that narrowed down my choices Which is a good thing....as if I put a 95 cover on, and THEN found out it wouldn't work.... Sigh...... Saved me a boatload of grief!

You guys are great! I really love this list.....

Larry

[SappySE107]

94 was the start of the 24x sensor there, so I think a 94+ cover will work. I don't recall any other differences between the covers.

[HayesPerformance]

Did you get a cover?

If not I have 4 Brand New 96' 3.4 DOHC covers