Fs: 5-Speed parts and intake.

[Barry]

I have for sale the following items:

Rare intermediate shaft with housing and bracket. I also have all of the mounting bolts for it. This only came on a limited ammount of berettas with the hm 282. The bearing is still good and the part is very clean. The bracket has a small hairline crack (maybe 1.5 in long?) where one of the bolts go. It wont cause a problem, but you could weld it if you like.



Price, offer.

External slave and master cylinder. Complete with line, still connected. Worked fine when in the car. Should fit all external slave getrags(hm-282). Great to have as a spare or for a 5-speed swap.



Note: Resivor is not included, however, if you want one, i can get one.
Price, offer.

1999 3100 upper and lower intakes. Im not sure if its a big port or not. It has the smoth top with the 3100 sfi raised up. There both in good shape, and i have al of the bolts for them too. The uim is painted red, but it loks bad. I would be glad to strip the paint before shiping it to you.




Price, offer

Thats all I have right now. I am located in eastern pa, 30 minutes from philadelphia. Local pickup is great, but i will ship too, no problem.

Thanks
Barry.

[SappySE107]

Those are large port, and the upper is pretty rare (though I dunno if that means it worth much). 99 3100 are almost all small port. Do you know what it came off of?

[onefastV6]

Strange but odd, a large port 3100 upper with the older style EGR.

[SappySE107]

Yeah, 3100MPFI had/has one as well. This is the 2nd one I have seen. Can you take a picture of the underneath on the plenum. I am pretty sure its identical to the minivans from 96-99 that are blank (design wise).

[Barry]

You guys are certain that it is big port? Well then i may keep it. Yes, ill get a pic from the bottom.

It came out of a 99 malibu or impala, one of those.

[bszopi]

Yeah, those are large port. Small port has 12 bolts for the upper to lower (vs 6 for large port), and the 3100SFI on the plenum is a dead giveaway. Small port was totally different.

[MY91GT(Z)]

and their is lines on the small port plenums like 94-96 3100 in grand am, beretta, and few others

[patgizz]

how much you want for just the bracket that bolts the end of the extension housing/shaft to the block(the one with the crack in it). i need one to pattern a steel replacement off of.

[Barry]

Edited.

[Barry]

and their is lines on the small port plenums like 94-96 3100 in grand am, beretta, and few others

Yeah i know that, my stock beretta intake has those ugly lines. The only reason that i was skeptical is because i read somewhere that 99 was not big port, even though it has the smooth top with the raised lettering.

[IsaacHayes]

MOST 99 cars were small port. Some lucky got large port.

[G-U-NOT]

Yeah, 3100MPFI had/has one as well. This is the 2nd one I have seen. Can you take a picture of the underneath on the plenum. I am pretty sure its identical to the minivans from 96-99 that are blank (design wise).

Is that a good thing??

What do 1996 3400 minivans come with, small or large port?
What about a 2003 3400 Impala?

[SappySE107]

Large port for both.

[sanjay]

45 bucks for the whole thing shipped. Bracket, bolts, housing, and shaft.

I made you an offer on that intermediate shaft 3 days ago by PM on V6Z24..

[Barry]

Sorry dude, i actually had 3 messages about it on z24. It never notified me so i didnt know i had it. Sorry about that. I got a much higher offer, but if he backs out, its yours.