Misc 3500 parts

[3400-95-Modified]

Need to clear this crap out...

I have Timing cover, Fuel rail, fuel injectors, Block, Oil pan, pulley, Exhaust Manifolds, 1 4 wire O2 sensor, 3500 LIM gaskets 4k miles no cracks, 3500 orange lower intake valley gaskets.

I'll try to get a picture of what I have in a pile but I just need it gone or its going to the dump.

All parts Best offer, and you pay shipping.

EDIT*
If you want anything PM me or E-mail me for quickest contact!!!!

[Guest]

timing cover bolts? Thats all I need

please email me

Shaun41178@hotmail.com

Thanks

[myellowcar1]

how about the exhust headers front and rear ????????

[myellowcar1]

how much for the headers front and rear
and pass side motor mount upper????????

[johnnymossville]

How much do you need for the 3500 injectors?



Sorry, just found out that they are too short for my application and I won't be needing them.

[3400-95-Modified]

myellowcar1 - I dont think it came with any motor mounts I can re-check that... You want the two 3500 style NON crossover manifolds?? If so I'll let those go for 40+ shipping. It has o2 sensors in both... Just checked my pics, One sensor is bad, other is ok... not that it really matters I guess... As you can see from the pic motor mount never came with it.


Shaun - Timing cover bolts, what style??? Ones from the 3500 or ones from a 3400 style with the large l-body upper motor mount bracket?? They differ. I think I have the 3500 originals.

pic of 3500 timing cover bolt setup... you need it like this?

[Guest]

I just need the bolts that hold the timing cover to the block. The 3500 timing cover bolts.

I have a 3500 block, but no bolts for the timing cover.

It would be much easier for you to email me and I can email yuo back then reply here or to send you pm's because I have restrictions on both. I don't have your email addy and couldnt' find it in your profile.

Shaun41178@hotmail.com

Thanks
Shaun

[myellowcar1]

did barnett racing make the headers on your car
if not who did ???

[geldartb]

those are the S&S headers sold for the N-body cars and he had to cut and rearrange a few things toi make them work.

[3400-95-Modified]

Barnett racing is my G/F father... He is a circle track driver at Thompson Speedway in CT

And yeah, they are S&S, ever so slightly modified to fit

[geldartb]

i like that ever so slightly. if i remember right you did a fair bit of customization to get them to work.

one of my cars will have headers by springtime prob the one that doesnt involve welding and cutting the pipe seen as how i dont have a welder.

[montess408]

hey do you still have the 3500 header style manifolds or did somone get them ?

[geldartb]

he sold that cause i was trying to nab it from him awhile back

[3400-95-Modified]

no I didnt... I still have the 3500 manifolds.

[Guest]

sent you 2 emails.