Tweet
I should be starting my 3900 & 6 spd swap in about a week when I return home and need to move a lot of my "Golden" metal not in use to recover as much of the expenditure as I can.
NO "FIRST DIBS" guys
THE PRICES LISTED ARE FOR THE PARTS ONLY AND ARE THE LOWEST I WILL ACCEPT AT THE MOMENT, so feel free to offer more or less than what's posted whatever it's worth to you. I'm asking roughly what I paid for the items along with shipping costs I incurred. I reserve the right to refuse any offer no matter what it is, change my mind, etc, since the loss or gain is on me. Any items that are sold will be marked appropriately.
3.9 Steel Crankshaft $150 it appears to be lighter than the 3500 steel crank due to how it's trimmed, the journals were in excellent condition when it was stored and still should be.
3.9 Heads complete $200. 1 exh seat unseated a little due to eng fire heat and should not be a problem reseating, they look great other than the smut on one head. No cracks or unusual stress areas noted after removal.
6 spd clutch flywheel assembly $100, from G6 that was nearly repaired instead of crushed. Can be used as is.
LS6 springs $45 low miles ~24,000, 16 from a GTO that was modded.
6spd shifter assy/w cables $100 LINK IS FOR VIEWING ONLY auction ended.
6spd shifter no knob $30
5 spd Getrag tranny $275 92 Beretta purchased off salvagers shelf in excellent condition about 4 yrs ago.
3500 exhaust Manifolds $50
3500 Camshaft $50 like new.
THIS is about half of what will be up for grabs, the rest of it will be posted between here, Ebay and the Fiero Forum in about a week when I can get my hands on it and includes:
My 7K 3500 steel crank V6 with turbo grind camshaft and 7x ring installed
Some of my 13 turbochargers
6 spd related axle parts
Fiero turbo setup currently in use on the car
727, 749, Fiero ecm's
And a whole bunch of other stuff I'll have to see to recall.
Pictures upon request
I do accept paypal though I can't stand them. I believe in doing good honest buisness and have maintained a 100% + over all of my transactions.
NO "FIRST DIBS" guys
THE PRICES LISTED ARE FOR THE PARTS ONLY AND ARE THE LOWEST I WILL ACCEPT AT THE MOMENT, so feel free to offer more or less than what's posted whatever it's worth to you. I'm asking roughly what I paid for the items along with shipping costs I incurred. I reserve the right to refuse any offer no matter what it is, change my mind, etc, since the loss or gain is on me. Any items that are sold will be marked appropriately.
3.9 Steel Crankshaft $150 it appears to be lighter than the 3500 steel crank due to how it's trimmed, the journals were in excellent condition when it was stored and still should be.
3.9 Heads complete $200. 1 exh seat unseated a little due to eng fire heat and should not be a problem reseating, they look great other than the smut on one head. No cracks or unusual stress areas noted after removal.
6 spd clutch flywheel assembly $100, from G6 that was nearly repaired instead of crushed. Can be used as is.
LS6 springs $45 low miles ~24,000, 16 from a GTO that was modded.
6spd shifter assy/w cables $100 LINK IS FOR VIEWING ONLY auction ended.
6spd shifter no knob $30
5 spd Getrag tranny $275 92 Beretta purchased off salvagers shelf in excellent condition about 4 yrs ago.
3500 exhaust Manifolds $50
3500 Camshaft $50 like new.
THIS is about half of what will be up for grabs, the rest of it will be posted between here, Ebay and the Fiero Forum in about a week when I can get my hands on it and includes:
My 7K 3500 steel crank V6 with turbo grind camshaft and 7x ring installed
Some of my 13 turbochargers
6 spd related axle parts
Fiero turbo setup currently in use on the car
727, 749, Fiero ecm's
And a whole bunch of other stuff I'll have to see to recall.
Pictures upon request
I do accept paypal though I can't stand them. I believe in doing good honest buisness and have maintained a 100% + over all of my transactions.
Comment