Announcement

Collapse
No announcement yet.

3.1L Performance parts!!!!

Collapse
X
Collapse
 
  • Page of 4
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 template Next
  • #1

    3.1L Performance parts!!!!

    Got bigger plans then building up my 3.1L so this stuff has to go! Prices don't include shipping. If you want pics just lmk and I will be happy to snap a few. Need to move this stuff out so make some reasonable offers!

    set of new Wiseco 0.020" over forged pistons complete with wrist pins and spirolox-275

    FFP Underdrive pulley new never installed-SOLD

    Lunati 210/210 cam and lifters new never used in plastic-SOLD!

    ARP Main studs with washers and 12pt nuts for Gen 2 bottom end-SOLD!

    May also have a set of harland sharp 1.6 ratio rockers from an sbc for sale later on.
    Last edited by Nightingale; 08-11-2007, 08:53 AM.
    98 camaro swapping in lz9 th400 setup
    LZ9 specs: (Subject to Change work in progress)
    4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.
    Tags: None
  • #2
    I got dibs on the udp! PM me with your Paypal addy and send some pics to ditchbangin500xc@hotmail.com Trav

    Comment

    • #3
      You got pm ghostgt
      98 camaro swapping in lz9 th400 setup
      LZ9 specs: (Subject to Change work in progress)
      4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

      Comment

      • #4
        stuff needs to move so make some reasonable offers.
        Last edited by Nightingale; 05-23-2007, 06:15 AM.
        98 camaro swapping in lz9 th400 setup
        LZ9 specs: (Subject to Change work in progress)
        4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

        Comment

        • #5
          Small price drop.... need to move this stuff so I can get on the ball with 07 projects!
          98 camaro swapping in lz9 th400 setup
          LZ9 specs: (Subject to Change work in progress)
          4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

          Comment

          • #6
            the pistons are they 3100 or 3.1 and what cr.are they setup for 327 rod pins or stock sized pins got pics?
            sigpic

            Comment

            • #7
              also need complete specs on the cam duration @.050 , lift, lsa etc
              sigpic

              Comment

              • #8
                They are 3.1L pistons but I believe they should fit the gen 3 motor no problem. I bought these of a guy a couple years back and was sold to me as stock replacements other then being forged and having floating pins. I measured the wrist pin itself at 0.92" diameter but my caliper its not terribly accurate (cheapo plastic). The compression ratio isn't marked on the piston top itself but the info I do have is 1.464 compression height, and 124 dish which I am not sure if its corresponding to dish depth at .124" or what. I never recieved any papers with them other then the markings on the one pistons and the spirolox packets.

                As for the cam Lift on int. and exh. is at .441 with 1.5 ratio rockers. Duration @ .50 is 210 on both int. and exh. Advertised duration of 260/260 and Lobe seperation is 110 degrees.

                Pm me an email address for pictures.
                98 camaro swapping in lz9 th400 setup
                LZ9 specs: (Subject to Change work in progress)
                4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

                Comment

                • #9
                  still got the udp will pay pal asap!!

                  1998 Monte Carlo Ls White 110K

                  Comment

                  • #10
                    You got PM CodeRed
                    98 camaro swapping in lz9 th400 setup
                    LZ9 specs: (Subject to Change work in progress)
                    4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

                    Comment

                    • #11
                      sorry about that ive got a shitty wifi conection here at home, 90% of the time i dont have a connection lol.
                      u can mail pics to lethalrides2k5@yahoo.co.uk.
                      dont need pics of the cam just the pistons
                      sigpic

                      Comment

                      • #12
                        Originally posted by boostedrs View Post
                        sorry about that ive got a shitty wifi conection here at home, 90% of the time i dont have a connection lol.
                        u can mail pics to lethalrides2k5@yahoo.co.uk.
                        dont need pics of the cam just the pistons
                        Did you win the lottery again, dave? lmmfao
                        Links:
                        WOT-Tech.com
                        FaceBook
                        Instagram

                        Comment

                        • #13
                          Originally posted by ForcedFirebird View Post
                          Did you win the lottery again, dave? lmmfao
                          lol there not for me, there for a motor im building for somone
                          sigpic

                          Comment

                          • #14
                            All Pm's replied too!
                            98 camaro swapping in lz9 th400 setup
                            LZ9 specs: (Subject to Change work in progress)
                            4.0L(after bore 3.917 and stroke 3.3485),carrillo sbc rods(narrowed),wiseco custom forged pistons 8.5:1 CR, TCE Double Roller timing chain, gen 3 cam, P&P heads, headers 1 3/4 primaries into 3-1 collector, and going to run ms2.

                            Comment

                            • #15
                              hey im pretty sure my friend will be taking those pistons, just showed him the pics. so u should be getting a pm from him today or tom
                              sigpic

                              Comment

                              Previous 1 2 3 4 template Next
                              Working...
                              X