Well the project has been going for quite some time and the car is up and running very well. The turbo is a TD06 18g off a 92' GMC Typhoon, and so it the water to air intercooler setup. The engine is a 02' 3400 out of a Grand Am, and had 42k miles on the clock. I used the timing cover off the 2.8 that came out of the Fiero on the 3400 so I could use my stock alt, and a/c, it fit quite well (only the alt bracket needed major modification but not much). I also installed a whalbro 255 l/hr pump, spec stageIII clutch, high flow interecooler water pump, and innovative wide ban o2.
Here is the car
Here is what it looks like some what clean
Here is a lower shot of the turbo
Here is a shot of the lower intercooler that is mounted up front
Here is the intake I made
Here are some of the gages I installed (sorry about the flash it was dark)
Here is how the MS looks mounted (once again sorry about the flash)
Here is the car
Here is what it looks like some what clean
Here is a lower shot of the turbo
Here is a shot of the lower intercooler that is mounted up front
Here is the intake I made
Here are some of the gages I installed (sorry about the flash it was dark)
Here is how the MS looks mounted (once again sorry about the flash)
Comment