Announcement

Collapse
No announcement yet.

Turbo choices

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Turbo choices

    I would just like someone's opinion about this, out of these three turbos(T25,T28,T35) which one of the three could survive city driving, and give me the most use able power in all these situations (street,drag,highway,track)?

  • #2
    For the love of God, DON'T go with a T25.
    -Tony | gtsdurango.net
    '04 Dakota Quad Cab SLT 4x4 - the gas guzzling DD.
    '90 Turbo Grand Prix STE - ehh.. I'm working on it.
    '92 Gutless Supreme SL - RIP 5.2010
    '90 Turbo Grand Prix - RIP 6.15.2005

    Comment


    • #3
      WTH is a T35?

      Comment


      • #4
        I've never heard of a T35 either. The T25 and T28 will both be too small unless you have a 2.8 or 3.1 and are planning on lots of torque without much top end.

        Tim
        1995 Z34 - T04E "60" trim, 42.5 lb/hr injectors, AEM WBO2, FFP UD&DB, 3" exhaust, 2800 stall, shift kit, tranny cooler, Powerslot, Hawk HPS, rear disc conversion, KYB, Eibach, HMS F&R STB, Fittipaldi Force 18" wheels, big stereo, lots more coming eventually...
        325 whp 350 lb-ft

        Comment


        • #5
          WTH is a T35
          damn, I mean GT35 (GT3571) on this list...






          I've never heard of a T35 either. The T25 and T28 will both be too small unless you have a 2.8 or 3.1 and are planning on lots of torque without much top end.

          Tim
          Would then a GT3271 or upping to a GT3571 be a balance of the two, without much lag?

          Comment


          • #6
            The GT3571 shouldn't have much lag, but it's top end will be limited. The compressor upgrade to a GT3576 should provide a lot more potential from the compressor side of things with slightly more lag. You should always be able to do the upgrade later if the GT3571 isn't enough or if the GT3576 is too much. Any of the GT32xx turbos are just too small. The GT3582R is also an option (a great one IMO), though it may spool even slower than the others due to the larger compressor wheel.

            Tim
            1995 Z34 - T04E "60" trim, 42.5 lb/hr injectors, AEM WBO2, FFP UD&DB, 3" exhaust, 2800 stall, shift kit, tranny cooler, Powerslot, Hawk HPS, rear disc conversion, KYB, Eibach, HMS F&R STB, Fittipaldi Force 18" wheels, big stereo, lots more coming eventually...
            325 whp 350 lb-ft

            Comment


            • #7
              t25/t28 why were those even choices *rolls eyes*
              sigpic

              1993 Cavalier Z24, 3.1/3400 hybrid, crane 272 cam, LS6 springs,port and polish,2.5 exhaust to 80 series flowmaster,solid mounts

              Comment

              Working...
              X