turbo exhaust manifold for v6

[3100rettaracer]

well i am crazy i guess cuz noone ever turbos a 3100..i dont know why but yeah. i need info on exhaust set ups fpr the other 6s. thank you TONS!

[3.4Z24]

3.1 Turbo Gran Prix manifolds maybe? i'm not sure what the head differences are on the exhaust ports between the TGP 3.1 and the 3100s. prolly have to go custom.

[jeremy96gase]

if i remember right the TGP had round exhaust ports and the 3100 has D shaped ones.

[ikessky]

Check out http://www.exploitedracing.com

They don't have it listed on the site, but they offere a complete turbo system for the 3x00's. They are pretty good about answering e-mail, so just let them know what you are looking for.

[TurboGTU]

I would resort to making a custom "log" style rear exhaust manafold out of mild thickish steel pipes, 1/4 steel plate to make flinges. Keep the front manafold, and make a custom x-over with the turbo flinge and mount. Easier said than done....LOL. But its something.

[StudlyCamaro]

better be using at least a schedule 40 pipe for a turbo header

[RacerX11]

I agree...schedule 40 mild steel, with at least 1/2" flanges. 1/4" is way to thin.

Marty

[Guest]

I've been running mild steel tubing from Hedman Headers "box of bends", and 1/4" flanges for about 8 months now, no issues. I do agree that for any high power (higher heat) application something better should be used, all I'm saying is that the lesser can be used.

[gt88nnorm]

Re: turbo exhaust manifold for v6

well i am crazy i guess cuz noone ever turbos a 3100..i dont know why but yeah. i need info on exhaust set ups fpr the other 6s. thank you TONS!

[gt88nnorm]

turbo exhaust manifold for v6

Let's try this again...

Try this site

http://members.shaw.ca/turbofiero/fiero_headers.htm

[3100rettaracer]

spendy... i think i am gonna use my custom designed Y pipe instead.
but let me know if anbody has turbo headres they wanna sell.

[RacerX11]

Spendy, plus those Fiero headers will only work with the iron heads. I didn't see anywhere on that site if they made anything for the gen3 heads.

Marty

[vsop4me3.1]

sorry to bring up an old topic, but I didn't want to start a new thread for one question. so here it is.

I thought I read that you can flip a stock front manifold around and put it on the backside, and then you just need to fabricate a y pipe, is this right?

thanks

Matt

[sharkey]

nope, the outlet would be facing the wrong side of the car.

what you could do is just make a block off plate for the dowpipe on the rear manifold.

[vsop4me3.1]

no I mean flip it so the outlet is facing the drivers side. so it would be on upside down.