what kind of boost

[TheProfessor]

hey anyone that has a forced induction 660
im looking for some ideas
what route did you go turbo?? SC???
and from where and what did you have to do to get it to work

[oil pan 4]

I would never super charge one of these on a car.
Most of the super charger set ups are for low end power. You can make what ever you want if you plain it right.
I'm going for turbos. Not having the car over here with me makes it kind of hard to make turbo headers. I have seen some pictures of swept forward headers but I want to make ones more like a block huger.
I think most people go turbo with these cars.

[Doward]

Turbocharged RWD 3.1 in an '88 Camaro, here. 16G. 222.4 / 291.2 @ rear wheels.

[Guest]

<----<<Turbo

[Anonymous]

Actually about half of all supercharges installed are not for low end at all, they are for high end. Centrifugal baby!

But roots blowers, and twin screws, are generally more for low and mid range power.

[TheProfessor]

does anyone have a custom turbo setup on a FWD
what turbos did you guys use

[Anonymous]

A lot of people do. It all depends on what motor, rpm range, amount of desired boost, desired power, etc.

[bszopi]

There really aren't any turbo kits out there, so pretty much every non-TGP is a custom setup.

[TheProfessor]

well what i ment was what cars do the donor turbos usually come from
i have been thinking about one for my 3.1 for the 3000 to 6500 range probably no more than 6 to 8 psi