Announcement

Collapse
No announcement yet.

eaton M62 on 3400?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    im sure that kit would be abe to fit other cars other then just a grand am i was goin to try it almost 2yrs ago but life kept me from doin it but it may come back to me this winter if money comes and one is available at the time
    94 BerrettaZ26 3400,5 spd, aluminum flywheel, stg3+ spec clutch, poly mounts everywhere, strut and strut to rad braces, s&s headers, euro mirrors, and taillights, E36 headlights, blk widow spoiler, GTU rimz, intrax, KYB, OBD2 swap rear disk swap with ss lines and ss clutch line, addco rear bar

    07 Chrysler 300 Base, with C frt bumper blk halo headlights and foglights. Coming soon tinted taillights and 22". The Family ride

    Comment


    • #17
      It will, and has, fit other applications besides a GA. Problem is getting a hold of one...
      -Brad-
      89 Mustang : Future 60V6 Power
      sigpic
      Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

      Comment


      • #18
        hey guys thanks for all the info about this setup. I've looked at the M90 and the MP90, the problem is how ridiculously high the supercharger sits and the fabrication that comes with it, also a big gapping hole in my hood. but the m62, I've found one, luckily, the question I'm really concerned with the where and how does it mount to the motor, and what programmer or tuner I'm going to need. once again thanks a lot for all of this, its really helping.
        sigpic
        - 03 Monte Carlo LS
        - 2.5" Magnaflow exhaust
        - ceramic Pacesetter headers
        - UDP and alternator pulley
        - LS6 valve springs and MMS stage 1 cam
        - d.i.y. intake with K&N con filter

        for a little guy, he runs pretty good

        Comment


        • #19
          All of the other pieces were unique to that kit. So it order for you to do it, it will all have to be custom fabricated.
          -Brad-
          89 Mustang : Future 60V6 Power
          sigpic
          Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

          Comment


          • #20
            i like to move it move it
            sigpic
            - 03 Monte Carlo LS
            - 2.5" Magnaflow exhaust
            - ceramic Pacesetter headers
            - UDP and alternator pulley
            - LS6 valve springs and MMS stage 1 cam
            - d.i.y. intake with K&N con filter

            for a little guy, he runs pretty good

            Comment


            • #21
              i believe the official number of kits that were produced was 17.....and they can get you going fairly well, but not far enough which is why i ditched mine as well..........

              S...........L...........E...........E...........P...........E...........R

              Comment

              Working...
              X