Tweet
hey guys... cars almost done... ive been turboing it... yummy.. cant wait to see how it runs.. my question is though.. do i have to do anything to my tune as far as keeping my self from blowing the stock cast pistons out of the bottom? there shouldnt be any reason i shouldnt have it running tomorrow night.. im so excited to hit that key... any and all help is appreciated..
-
1996 beretta w/a 04' 3400 3.5 top end, 42.5lb hr, 180*thermo, t3t4 .63ar 60 trim, LC1 WB, FMIC, greddy rs BOV,TIAL 38mm wastegate,791xv,fidanza,stage III clutch,TG LSD,ffp udp,walbro 255 lph,strut tower brace,22 rear sway,30 front sway,92 5sp tranny,92 subframes,all solid mounts,kyb shocks and struts,eibachs,battery in trunk,tgp map sensor,DHP Powrtuner,euro front and rear and more to come soon...mods sitting in boxes waiting install....zo4 kit,GTU wing,and more.. -
I would get larger injectors unless you plan to keep it under 5 psi. That turbo is going to flow a good amount of air and 22's aren't going to cut it. -
i plan to update the injectors really soon... with these
1996 beretta w/a 04' 3400 3.5 top end, 42.5lb hr, 180*thermo, t3t4 .63ar 60 trim, LC1 WB, FMIC, greddy rs BOV,TIAL 38mm wastegate,791xv,fidanza,stage III clutch,TG LSD,ffp udp,walbro 255 lph,strut tower brace,22 rear sway,30 front sway,92 5sp tranny,92 subframes,all solid mounts,kyb shocks and struts,eibachs,battery in trunk,tgp map sensor,DHP Powrtuner,euro front and rear and more to come soon...mods sitting in boxes waiting install....zo4 kit,GTU wing,and more..Comment
-
Hey dude just buy the 42.5lb injectors from ZZPerformance
They are very very good price
check http://www.zzperformance.com/grand_p...cts.php?id=113Comment
-
i wish there was a option for me to get new 42.5lb that would fit my already modified harness.. since i had to modify the harness once already for the 22.5lb... do the 42.5lb fit the 3100 harnesses without modification?? looks like i need a 3100 96 beretta injector harness AGAIN...1996 beretta w/a 04' 3400 3.5 top end, 42.5lb hr, 180*thermo, t3t4 .63ar 60 trim, LC1 WB, FMIC, greddy rs BOV,TIAL 38mm wastegate,791xv,fidanza,stage III clutch,TG LSD,ffp udp,walbro 255 lph,strut tower brace,22 rear sway,30 front sway,92 5sp tranny,92 subframes,all solid mounts,kyb shocks and struts,eibachs,battery in trunk,tgp map sensor,DHP Powrtuner,euro front and rear and more to come soon...mods sitting in boxes waiting install....zo4 kit,GTU wing,and more..Comment
-
lol, mmm that I don't really know but , the 42.5 lb fit on my 1999 LA1 harness without no modification.Comment
-
what the la1??? lol sorry im not good with the engine code stuff...
heres a pic of my progess.....
1996 beretta w/a 04' 3400 3.5 top end, 42.5lb hr, 180*thermo, t3t4 .63ar 60 trim, LC1 WB, FMIC, greddy rs BOV,TIAL 38mm wastegate,791xv,fidanza,stage III clutch,TG LSD,ffp udp,walbro 255 lph,strut tower brace,22 rear sway,30 front sway,92 5sp tranny,92 subframes,all solid mounts,kyb shocks and struts,eibachs,battery in trunk,tgp map sensor,DHP Powrtuner,euro front and rear and more to come soon...mods sitting in boxes waiting install....zo4 kit,GTU wing,and more..Comment
-
looks good. Take your time and dont' rush. It took me 8 months from start to finish for mine, but it looks damn good and works even better.Comment
-
The LA1 engine is the 3400SFI engine that came with the alero/grand am lolComment
-
ahhh i have a la1.. lol but mines a 00 and im using the multitec 2s... dammn1996 beretta w/a 04' 3400 3.5 top end, 42.5lb hr, 180*thermo, t3t4 .63ar 60 trim, LC1 WB, FMIC, greddy rs BOV,TIAL 38mm wastegate,791xv,fidanza,stage III clutch,TG LSD,ffp udp,walbro 255 lph,strut tower brace,22 rear sway,30 front sway,92 5sp tranny,92 subframes,all solid mounts,kyb shocks and struts,eibachs,battery in trunk,tgp map sensor,DHP Powrtuner,euro front and rear and more to come soon...mods sitting in boxes waiting install....zo4 kit,GTU wing,and more..Comment
Comment