If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
proceed to the Forums area and select the forum that you want to visit.
225/60 16>135 profile plus 16 inches (406.5mm) for a total of 541.4.
aftermarket
225/50 17>112.5 profile plus 17 inches (431.8mm) for a total of 544.3
Not much, but tire manufactures use different tread depths and usually this is not added to profile, the profile is the sidewall up 3/32 remaining most times. Adds up to about 1/8th of an inch up to 1/2 per manufacture spec.
The most I have seen without modifications is 560mm with + offset.
Closest you can get is 245/40/18. Go look up the prices of them and then think real hard if you really want them.
If you're gonna say someone is wrong, MAKE SURE YOU'RE RIGHT.
225/60/16 is 26.7" dia. 245/40/18 is 25.7' dia.
That will throw off your speedo 5 mph. (5 mph. for every inch.)
245/45/18 is 26.7" dia. And if you're a mexican 275/40/18 is also 26.7" dia. but 11" sidewall to sidewall.
Sorry about the wrong size before. It would throw your speedo off 7 to 8 mph.
Comment