Billet Oil Fill Caps - Need your opinions

[geoffinbc]

How do they seal?

They use an o-ring just like the factory caps do. Matter of fact I just reused the one from my old cap on the new one.

Sweet well if you made one for Fiero covers I'd buy one for sure. I'd say they would be worth 30 to 60 dollars. But it depends on how many you make at once I guess.

If you dont have a Fiero cap I can try and see if there are any left in north america and bring one in. I get dealer cost so wouldn't mind buying one for the cause. Plus when you are done I would then have an extra.

[Lyle's GTP]

I'll take one for sure. But I want mine to say.

CASTROL
FULL SYNTHETIC
OW-30

Except centered on the cap. Maybe you can do it?

Lyle

[CNCguy]

I'll take one for sure. But I want mine to say.

CASTROL
FULL SYNTHETIC
OW-30

Except centered on the cap. Maybe you can do it?

Lyle

It can be done but I do not know what it would cost yet. As with anything else, one-off custom parts are more expensive. Let me give this some thought about what would be the quickest and cheapest way to do the customized engraving.

Marc

[bszopi]

the quickest and cheapest way to do the customized engraving

I'd say a scribe. Or maybe one of those vibrating engravers... Hell, just use a sharpie!

:P

Sorry, I had to.

[imported_germ]

polished, w/ 3400, NOT recessed, just like the one in the picture (bottom left)

how much and when and do you take paypal, lol


i want mine yesterday hehehe.


very nice product you got there.

[imported_germ]

these are made to "line up" correctly right?


like the wording will be facing the correct way and not upside down when the cap is on right?


just checking by the way.

[CNCguy]

these are made to "line up" correctly right?


like the wording will be facing the correct way and not upside down when the cap is on right?


just checking by the way.

Of course they line up



I still have to find O-rings for them before I can ship any of them.

[CNCguy]

the quickest and cheapest way to do the customized engraving

I'd say a scribe. Or maybe one of those vibrating engravers... Hell, just use a sharpie!

:P

Sorry, I had to.

I had considered the vibrating engraver like at a trophy shop but think they look better with nice deep engraving. It stands out alot better. IMO

[imported_germ]

i dont need the oring

i have a billion of them


and a few spare oil caps that i could ravage as well


just let me know when you can ship and you will have some money from me.

how much for just the brushed finish and the 3400 logo like the bottom right pic and the installed pic.

???

[Synestral]

I would love one of these eventually, especially if you could custom engrave the mortal combat dragon into a recess. Sad thing is I won't start spending money on my project for several more months while I'm searching for parts and getting the details all worked out. Perhaps by then they'll be in the 60v6 store?

[imported_germ]

any word on this?

hell, i dont care if it has the 3400 on it, i would take a a plain one, lol