This is a GREAT site but.....

[stoned_pimp420]

Is there a website specifically dedicated to the 90 degree V6? This is a great site for the 60 degree but I mostly own 90 degree engines and I kinda would like it if someone could point me in the direction of a site sorta like this one, or possibly make a 90 degree section on this site.
ANY help will be appreciated!

[Guest]

RE: This is a GREAT site but.....

Not that I am aware of, but it would be nice.

[firechiken]

RE: This is a GREAT site but.....

Don't hold your breath waiting for a 90 degree section here. Your best bet would be a site specific to your vehicle.

[Doubt_Incarnate]

the gm forum evaporated. it had just about every moror, and platform. you could always start a site.

[bszopi]

A section here has been brought up before, and I will let you know that its not going to happen. Why have a site dedicated to the 60V6 with a 90V6 section? And none of the owners of the site plan on starting another site for an engine we don't know (or care to know) about. AS stated, your best bet would be goto a platform specific site. Try to get someone from one of those site to start a site similar to this. I doubt you'll get very far though... We started out as a VERY small group of guys (there are still about a dozen or so original people here), and have built up to where we are now over the course of 5+ years. And sadly, we really aren't as big as we'd like to be.

[StEvEzAsYcHo]

https://www.L67swap.com

It is based on swapping in the motors, but also can be of great technical use..

[SappySE107]

There are a lot more 90V6s, and I have tried to help out some friends with a 90V6 site but there was a problem trying to break the motors down. If you had it for just the FWD 3800 series, then you could probably build a good technical site in no time given enough people care to help. That alone is the biggest factor. I started another site with a friend for the w bodies so everyone could pitch in, but its a slow moving process as well.