I'm getting close to my first start on my Turbo 3500 F23 swapped Fiero, and I would like to hear some good exhaust sound clips. I'll add mine once I have one!
Announcement
Collapse
No announcement yet.
Cammed exhaust note.
Collapse
This topic is closed.
X
X
-
3 inch Magnaflow CAT, Borla 3x5x15, Magnaflow tailpipe muffler:
https://www.youtube.com/watch?list=U...yer_detailpage
3 inch Magnaflow CAT, Borla 3x5x15, SuperTrapp add-on discs, (30) :
https://www.youtube.com/watch?v=oQTg...O7tic4G8nlMINgLast edited by AleroB888; 10-12-2014, 11:24 AM.1999 GLS MP90 supercharged / 2003 GL MP62 supercharged / 2004 GLS stock
Magnuson MP90 / TOG's / 3 in. Magnaflow exhaust / MSD ignition / LS1 MAF / Racetronix pump / HP Tuners / TCE 68mm TB / 36 lb Inj
= Best track time: 12.951 @ 104.48, 1.839 60 ft. (Beech Bend Raceway Park, 11-23-13), 50 Deg. F
http://www.youtube.com/watch?v=hpVYZPbpPzk
-
I'll Have to get you a new video of my car... Been a while since I've recorded it.
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS
Comment
-
3500, heads cam intake. 1.625" primaries into 2" logs into a divided T3 housing on a 57mm turbo. 3" downpipe, no cat, 3" hooker aerochamber muffler, single exit w/ turndown. exhaust length from the turbo to the turndown is maybe 6' long.
same setup as above, except straight pipe w/o turndown instead of the muffler.
it still needs extensive tuning, idle in all videos is about 900-1100 RPM, hoping to bring it down to about 675-750 with more tuning.
Edit:
yes, I know it's an old post, but I wanted to post a follow up.
"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
- Likes 1
Comment
Comment