You might be a 60v6 enthusiast if...

[robert 1980]

I gorilla glued my work boots too hahaha

[pocket-rocket]

I'm still debating if it's redneck or 60v6 enthusiast, lol.

Either way, at least I'm not the only one trying to stretch the life of them

[HOYS]

Some people might not laugh as much as I do with these but:

You might be a 660 enthusiast if you don't really like boost.

You might be a 660 enthusiast if you don't like going *that* fast

You might be a 660 enthusiast if you modify your DD (guilty)

You might be a 660 enthusiast if you own more than one 660 vehicles. (Personally two, family has owned 3-4)

You might be a 660 enthusiast if when your family members buy a car and its not a 660, you facepalm.

[geldartb]

I'm not sure if this is 60v6 enthusiast or straight up redneck, but...



You might be a 60v6 enthusiast if you use an old FWD 60v6 water pump pulley to clamp your work shoe with after you Gorilla Glue it...


Yeah, 2 year thread revival ftw!

haha i have used gorilla glue and super glue. what ever i still had enough of at the time. gorilla glue holds up longer but the super gets the fast dry time if i was in a hurry. gotta get every mile i can out of them.

I'm still debating if it's redneck or 60v6 enthusiast, lol.

Either way, at least I'm not the only one trying to stretch the life of them

thin line on that one. might be more red neck. but when there is still enough meet on the soles then why not right.

[TGP37]

If you have a passionate hatred for Dex-Cool, you just may be a 660 nut!

If you replaced your LIM more then once, you just may be a 660 nut!

If you have nightmares trying to remove the oil pan......lol

[SappySE107]

If you want to put a 60V6 in a BMW, Chevette, MGB, and every other car you get your hands on...you might be retarded. er, a 60V6 enthusiast hahaha

[robert 1980]

If you try and get good shift cables made.From west coast fireo and they say that the cable may or may not work.Then jack your shift cables and tell you they want 170 bux.You also might be retarded.

[SappySE107]

That is messed up.

[blackbombshell95]

If you spend 10 grand on a 3400 engine and transmision and let it sit for 5 years just for the pleasure of Ben sending me messages, is it done yet? Is it done yet? The answer is always next year.

[SappySE107]

I hate you

[geldartb]

If you try and get good shift cables made.From west coast fireo and they say that the cable may or may not work.Then jack your shift cables and tell you they want 170 bux.You also might be retarded.

to respond to that
you might be a 60v6 enthusiast if you drive out to said shop and knee cap them for holding your parts hostage.

If you spend 10 grand on a 3400 engine and transmision and let it sit for 5 years just for the pleasure of Ben sending me messages, is it done yet? Is it done yet? The answer is always next year.

not to derail but i thought you had that running.

i had a good one but now i'm drawing a blank.

[3400-95-Modified]

If you can rummage through a box of random OEM bolts and tell someone what each and every bolt goes to....

You can tear apart a 60* and not have to poke your pushrods in a cardboard box to get the positions correct...

You can tear apart a 60* and not have to label anything.

[robert 1980]

If you can rummage through a box of random OEM bolts and tell someone what each and every bolt goes to....

You can tear apart a 60* and not have to poke your pushrods in a cardboard box to get the positions correct...

You can tear apart a 60* and not have to label anything.

Yeah because you take it apart every week.

[geldartb]

You can tear apart a 60* and not have to poke your pushrods in a cardboard box to get the positions correct...

You can tear apart a 60* and not have to label anything.

got to that point awhile back

[Z3500]

You might be a 60v6 enthusiast if... people think you are F'ing nuts for changing out your 2.8 for a 3500, but you still spend ten minutes explaining why you HAVE to do it.