Tweet
is anyone able to make a 1 inch spacer like the TCE ones or would Ben be able to do it.
or i could buy another set and glue them together.
or i could buy another set and glue them together.
-
sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
-
I have a set of TCE spacers that are 1.25" thick. I don't have a price right now but if that would work let me know.Ben
60DegreeV6.com
WOT-Tech.com -
yeah that would be fine. let me know a price. thanks. thats the pair rightLast edited by geldartb; 09-01-2007, 11:30 AM.sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
-
any update on the price.sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
-
105 shipped. I only have 1 set so it won't be on the store.Ben
60DegreeV6.com
WOT-Tech.comComment
-
ok ill get back to you the end of the week.sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
-
Will 1.25" clear the hood?
Going Nitrous ?
sigpic
New 2010 project (click image)
1994 3100 BERETTA. 200,000+ miles
16.0 1/4 mile when stock. Now ???
Original L82 Longblock with LA1, LX9, LX5 parts
Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.
Comment
-
With my 1" spacers I had, the intake touched the hood. So it will be a very tight fit to add another 0.25". Of course, the GA may have more hood clearance than a Beretta.-Brad-
89 Mustang : Future 60V6 Power
sigpic
Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blogComment
-
Yeah that's what I was thinking too.sigpic New 2010 project (click image)
1994 3100 BERETTA. 200,000+ miles
16.0 1/4 mile when stock. Now ???
Original L82 Longblock with LA1, LX9, LX5 parts
Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.
Comment
Comment