Any ideas on putting downdraft carbs on a 3.4dohc

[normsf]

Hello, Ive put three of these great motors in Fieros at www.normsfiberglass.com so I have a good idea of what it takes to install them, but I have this new crate motor that I want to put in a race only Fiero and would like to put three 2barrel carbs on (Webber. Dells.)what suggestions do you have for a intake. And thankyou to Ben for this great site. Norm

[patgizz]

how would you do the ignition? stand alone DIS?

[RebelGT]

is it a carb only class? if its not, i'd stay away from the carbs, you're not going to gain anything from this but headaches.

[RebelGT]

is it a carb only class? if its not, i'd stay away from the carbs, you're not going to gain anything from this but headaches.

[SappySE107]

Im not sure why you want to do carb, but I personally wouldn't do it. I know someone made a carb setup because it was on ebay a while back with a distributor adapter to go with it (odd but i guess it worked). Using the 96 lower intake might be a good starting point though for carb if you have to use carbs for your setup. If you are just worried about tuning, I might be able to help you out with that if you have a 91-95 DOHC computer instead of the fiero computer.

I wish the weather wasn't so bad, I would like to drive up there and see your shop. I gotta go up to elkhart in a few weeks anyway to tune a friends car (driving from new york). I hope its nicer weather by then.

[normsf]

Hello You guys are great, that was another thought also the Distributer. Ben come on over when you go go to Elkhart 574-255-7843 thanks guys