Oil cooler hoses

[5speedz34]

I want to replace the oil cooler hoses on my '92 3.4. The hoses are formed, and I'm hoping some spare heater hose will get the job done, but I have my doubts. I've looked at most parts stores website and I can't find any at all. Does anyone know where I can find either pre-formed hose, or where to find the hoses other than the dealer?

Thanks.

[BMFH]

RE: Oil cooler hoses

Hello 5speedz34 and All

If you go to a large parts store and maybe the smaller one's too, they should have a Gates or other brands of Hoses book with pictures to match up with what you need, if you are looking for 90 Deg. formed hoses you can probably find something in the book that might work, more than that you may have to go to the dealer.

You may have to also go to a Heavy Duty parts supplier that supports the Trucking Industry Customers, they may not sell to you, but once you get the part number you can order it anywhere.

Hope this helps

John

[5speedz34]

RE: Oil cooler hoses

Well, I'm going to leave the hoses for now I think. See if I can get the part #'s from the dealer and order them off GM Parts Direct.

[Lyle's GTP]

RE: Oil cooler hoses

I got some new hoses, If you want them. Free, if you pay the shipping.

Lyle

[5speedz34]

RE: Oil cooler hoses

Yeah sure heres my adress are these both of the hoses?

[Lyle's GTP]

RE: Oil cooler hoses

Yep. I'll check out shipping this weekend.

Lyle

[5speedz34]

RE: Oil cooler hoses

Ok, for some reason when I PM you it is telling me your username doesn't exist.

Will $10 USD cover the cost, if so I'll send the paypal out asap.

[Lyle's GTP]

RE: Oil cooler hoses

Actually that's $10.00CDN. I'm not 100% sure yet, about the size/weight. I have to dig them out and package them and then get it checked. See if you can email me, through the site.

You might want to delete your adress from above aswell.

Lyle

[5speedz34]

RE: Oil cooler hoses

Yeah, I don't know what the hell is going on just get a hold of me after you get the shipping quote.

Thanks

[series8217]

Here's the GM part #s for the oil cooler hoses:
Inlet: 10131031
Outlet: 10131032

They are available from Gmpartsdirect.com.
You could just use standard heater hose for the line going to the water pump (the outlet hose).

[vsop4me3.1]

Re: RE: Oil cooler hoses

You might want to delete your adress from above aswell.

Lyle

ya thats really good advice

[5speedz34]

RE: Re: RE: Oil cooler hoses

Anything new on shipping?

[Lyle's GTP]

RE: Re: RE: Oil cooler hoses

Actually I have some bad news. I have searched high and low for those hoses, with no luck. I can only think that they have been accidentaly disgarded. Which really sucks, because when I decided I didn't need them, I made a point to save them for somebody on the site. I appologize for misleading you. If I some how stumble apon them you will be the first to know. Sorry again.

Lyle

[5speedz34]

Actually I have some bad news. I have searched high and low for those hoses, with no luck. I can only think that they have been accidentaly disgarded. Which really sucks, because when I decided I didn't need them, I made a point to save them for somebody on the site. I appologize for misleading you. If I some how stumble apon them you will be the first to know. Sorry again.

It's no biggie, I have the part numbers which is fine, and I'll just order then through GM Parts Direct sometime.

[Lyle's GTP]

Cool.

Lyle