I Need Help! Just Replaced Head Gasket

[WhiteZ34]

I just got done replacing my head gaskets and when I went to start it, it idles at 2k and it doesn't go down either. The timing seems to be just fine. and I am fairly confident that everything is tight. Any tips would be great.

WhiteZ34

[pepsi_coke]

Vaccum lines snap ?
How bout something as so simple as the Idle Air Control valve .. or the Throttle Position Sensor ?

[bud36light]

Just look for a(some)vac leak(s).

[pepsi_coke]

I posted earlier about how I just changed my head gaskets. It was idling at 2k but I found a vacum leak and fixed it. It idles normally now and accelerates just fine like it should. The problem now is that it has a loud clicking sound that increases with acceleration and every now and then the motor shakes a little bit. Any suggestions?

He fixed that and now started another topic .. found here:

http://www.60degreev6.com/index.php?name=PNphpBB2&file=viewtopic&t=4971