Tweet
Ok i got water pump off ,,,,now the problem is i can only get 2 bolts to go back in to the water pump....other bolts will either not go in or go in at an angle
-
-2000 GTP - 332/426
-94 GTP - Stock, But needs new:
Door, Steeringwheel, fender, windshield and window for new door, and power steering line. -
Try using a small mirror to look at the bolts, you might be able to get a better look at what the problem might be, or why they will not go in .1995 Chevrolet Monte Carlo Z34 -
ok, the water pump housing only goes on "one way" and all other ways, not all 5 bolt holes will line up. So basically turn the pump until all 5 line up. There's also a metal locating "tab" on the outside of the perimeter of the pump, this should be pointing up.Brian
'95 Cutlass Supreme- "The Rig"
3400 SFI V6, 4T60e
Comp Cam grind, LS6 valve springs, OBD2 swap, Tuned
2.5" DP/ 2.5" dual exh/ Magnaflow Cat/ crap mufflers/ 3500 Intake manifold/ 65mm TB
TGP steering Rack/ 34mm Sway Bar/Vert STB/ KYB GR2's
'08 Chevy Trailblazer SWB 1LT "Smart Package"- LH6 5.3L V8/4L60e, A4WDComment
Comment