Tweet
its pricy but has the 2 flats for the cams and the cam holder and gear remover... i thought i heard there were out of production!
-
its pricy but has the 2 flats for the cams and the cam holder and gear remover... i thought i heard there were out of production! -
No the stock tools are available, but the adjustable stuff is gone.Ben
60DegreeV6.com
WOT-Tech.com -
i forget my measurements, but roughly, 5"x3/4"x3/4" solid bar stock.
I had 2 bars made with a hole through the middle and had the surfaces machined within .004" tolerance, then blued them. It cost me $65, at a local machine shop, to have them made from a rough sketch, and $4 for the bluing to prevent rust. They are so strong I can break the bolt free and torque it again when I adjust timing.sigpicHow to make High performance Emissions:
A "true" High flow converter, straight pipe.
Low/No flow EGR valve, block off plate.
Carbon canister and purge valve mod, place in large 30 Gallon can, cover, and place curbside, the city will do the rest.
PCV valve and vent tube, reroute to exhaust to dump where it belongs, on the ground. Or add breathers and let it all free.Comment
-
on here it says 1/2 bar stock and 5/8"s hole IIRC. in the reference section.... im still tempted to make adjustable ones by adding spacer blocks or screws to hold the cam flats. just dont know the dist change to build them yet.Comment
-
I made that before it didn't work all it did was bend and crack. I have the ajustible timing tool
96 Z34 3.4 SC DOHC Getrag, 284 5sd manual transmission, stage 3spec clutch, 97 engine, 97 pcm, S3 intercooler 1 of 1 Roots SC LQ1 in the world 8.5 psi.Comment
-
What did you have it made out of, aluminum?Originally posted by Dave96z34 View Post
Mine are tool grade steel.sigpicHow to make High performance Emissions:
A "true" High flow converter, straight pipe.
Low/No flow EGR valve, block off plate.
Carbon canister and purge valve mod, place in large 30 Gallon can, cover, and place curbside, the city will do the rest.
PCV valve and vent tube, reroute to exhaust to dump where it belongs, on the ground. Or add breathers and let it all free.Comment
Comment