Ok, so i need to know how to burp the cooling system in my car, i tried beer last night, patting it on the back... everything. but it just seems to be shooting nothing but steam out of the bleeder valves (for 15 mins straight) i checked and the rad is full. the reserve tank is sitting on the cold line, and the car is almost over heating according to the dash gauge. BUT no heat from the vents, and i had both bleeders open for 15 straight mins with the engine at 2k rpm and still nothing but steam. the one on the front rad hose kindof got a little bit of a drip. but i hear it should shoot a stream of coolant out.
what am i doing wrong? or is my water pump not pumping water? the engine had no thermostat before, and i had to ask a couple people to find out that it goes springs towards the motor (is that right?) or springs to the rad? either way, its on the hose by the coil packs. i have no idea which way the coolant flows but it makes sense if it comes out that hose i guess, but yes... no heat, no stream of coolant... no nothing. just steam and a really high coolant temp gauge.
thanks in advance for any help or advice
what am i doing wrong? or is my water pump not pumping water? the engine had no thermostat before, and i had to ask a couple people to find out that it goes springs towards the motor (is that right?) or springs to the rad? either way, its on the hose by the coil packs. i have no idea which way the coolant flows but it makes sense if it comes out that hose i guess, but yes... no heat, no stream of coolant... no nothing. just steam and a really high coolant temp gauge.
thanks in advance for any help or advice
Comment